myhondas Posted April 18, 2014 Report Share Posted April 18, 2014 (edited) So I decided I own enough guns that I need a sight pusher/installation tool.I searched the web and found that the MGW was the highest rated unit out there....rated as a professional gunsmith and armorer’s tool.Right now, I have the setup for : Springfield XD & XDs; Ruger LCP, LC9; ,Glock (all); Colt 1911, Sig 1911, Bersa Thunder 9; , S&W M&P, S&W M&P Shield; Sig P220, P225, P226, P228, P229, P239; I will be adding more later….Additional available tool sets are for the following guns: Beretta 92/96; Beretta Cougar, PX4; Bersa BP9, BP40; Colt Mustang; FN; Glock 42; HK USP, P2000, P30, P45; Ruger SR9, SR9C,SR40, SR40C, SR45; S&W 3rd Gen 9mm; I am setting up a regular service of removing/installing front & rear sights for $25 per sight or both for $40 plus the cost of the sights if you do not furnish them and turn around in one to two days. Shipping at actual costs if you can’t come to me. My shop is in South Euclid. 216-297-2977 I have been using the williams firesights and I can also get the Dawson Precision sight sets in or the Tru-Glo. Anyone interested can also contact me here on OR I am charging $25 per sight or both for $40Pushing a sight @ $12.50 Edited May 13, 2014 by myhondas Quote Link to comment Share on other sites More sharing options...
C-bus Posted April 18, 2014 Report Share Posted April 18, 2014 I have the Glock and Sig versions. Very handy. Quote Link to comment Share on other sites More sharing options...
myhondas Posted April 18, 2014 Author Report Share Posted April 18, 2014 Do you have their dedicated unit or the sight pro with the slide blocks for the glock & sig? I was really impressed with the quality and heaftyness of this unit over anything else out there. Check out this video on the unit.... Quote Link to comment Share on other sites More sharing options...
C-bus Posted April 18, 2014 Report Share Posted April 18, 2014 Dedicated units. Quote Link to comment Share on other sites More sharing options...
myhondas Posted April 21, 2014 Author Report Share Posted April 21, 2014 Just put the new Williams fiber optic Fire Sights in the Ruger LC9. This unit is a total breeze to remove and install sights. Total time from start to finish was about 10-15 minutes on the front. Majority of the time was tweaking the front sight to be perfectly centered on the slide by using a digital micrometer. Quote Link to comment Share on other sites More sharing options...
speedytriple Posted April 22, 2014 Report Share Posted April 22, 2014 How lucky are you the slide comes off your lc9. I sent mine back three times to ruger for it breaking and the slide not coming off the gun, and the front sight falling off at the range. They "fixed" it each time just to have it break again. I asked for a new gun and they said to send it back they would "fix" it they made it work and I promptly sold it. I replaced it with a xds9mm a bit heavier then the lc9 but I am much happier with it. WHat rear sight would you guys suggest for the xds the front is fiber optic the back is not. Quote Link to comment Share on other sites More sharing options...
myhondas Posted April 22, 2014 Author Report Share Posted April 22, 2014 I have a Springfield XDs 45 myself. Right now, I am looking at the Williams Fire Sight or the Dawson when it is released this year to put on it. All of my CCW guns also have Crimson Trace Lasers on them. Sights on the guns are for target shooting. Sorry to hear about your LC9 problems. Mine is fully operational and I actually prefer it to the M&P9 Shield or the XDs45 because of the size and lightness. Also, last time at the range, it gave me my tightest shot groupings. Quote Link to comment Share on other sites More sharing options...
speedytriple Posted April 22, 2014 Report Share Posted April 22, 2014 (edited) Mine shot great, an was a breeze to carry but i just got tired of not being able to take it apart to clean it. I might replace both my front and rear sights on the xds. I like a 6 oclock pattern, the xds has a hold over front sight. Been looking at the tru glo tritium fiber optic ones they offer a 6 oclock pattern and have both fiber optic and tritium.http://www.brownells.com/handgun-parts/sights/sight-sets/t-f-o-green-frt-rear-glock-20-21-29-30-31-32-37-sku902000084-23159-45937.aspx?cm_mmc=cse-_-Itwine-_-shopping-_-902-000-084&gdftrk=gdfV21820_a_7c187_a_7c1021_a_7c902000084_d_902000093_d_10597 Edited April 22, 2014 by speedytriple Quote Link to comment Share on other sites More sharing options...
myhondas Posted April 22, 2014 Author Report Share Posted April 22, 2014 (edited) I don't see anything for the XDS, just for the XD which is different I believe. The sight pro tool has a different slide adapter for them, although the dovetails for the sights may be the same & inter-changable. Those are nice sights even if they are a bit pricy. It also looks like the mfg doesn't allow any price discounting since every web site has them for $89.99 Edited April 22, 2014 by myhondas Quote Link to comment Share on other sites More sharing options...
speedytriple Posted April 22, 2014 Report Share Posted April 22, 2014 Guy i bought it from had a set on his xds .45 i will check to see if they are inter changable. Quote Link to comment Share on other sites More sharing options...
speedytriple Posted April 22, 2014 Report Share Posted April 22, 2014 From the looks of it they are the same as the xd, an xdm? Now to find the best deal on them.http://springfieldxdstore.com/pgroup_descrip/4_Sights/7050_Truglo+TritiumFiber+Optic+Sights//?return=%3ftpl%3Dindex%26category_id%3D4%26_Sights%2F%26%2F Quote Link to comment Share on other sites More sharing options...
myhondas Posted April 27, 2014 Author Report Share Posted April 27, 2014 I will be at the Berea Show on Sunday if anyone has a gun that you need the sights done on. I will be doing same day , one day , or two day service on sights. Quote Link to comment Share on other sites More sharing options...
speedytriple Posted April 27, 2014 Report Share Posted April 27, 2014 I am gonna try to be there if a trade goes through in the morning. I might be getting four guns to play with. You have a table at the show how will i know where you are. Quote Link to comment Share on other sites More sharing options...
myhondas Posted April 29, 2014 Author Report Share Posted April 29, 2014 I ddi not do a table. I was mainly there to get rid of some stuff & to pass out some business cards to a lot of the dealers there. Quote Link to comment Share on other sites More sharing options...
myhondas Posted June 23, 2014 Author Report Share Posted June 23, 2014 just an update for all the OR people that may want to use my services.....I have received the slide adapters for the additional guns..... Beretta Cougar, PX4Colt MustangGlock 42P2000, P30, P45Ruger SR9, SR9C,SR40, SR40C, SR45S&W 3rd Gen 9mmBodyguard 380 I am also offering a 10% discount for OR members. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.