XChris1632X Posted April 27, 2005 Report Share Posted April 27, 2005 i have a 350 block bored .30 over to 355 or for a 383 setup. the casting number is 14010207. the block was cleaned and checked for cracks, and painted with new freeze plugs put in. i believe it has new king bearing with it i can throw in but i know some are bent from someone stepping on one of the boxes. i also have a new scat 383 crank for sale. i cant find a number on it but it is cast. i also have lt1 rods with stock lt1 pistons. (i know they wont fit) but the pistons are still on the rods. i didnt do any of the work to this block. someone i know owed me money and couldnt come up with it so he offered me all of this. i had plans for it but changed the direction of my build. i do know that the block will need a finishing hone because it was planned to sit around for awhile and the very little bit of surface rust the it has will be removed with finish hone. not expensive at all. the crank may need to be cleaned but not 100 percent sure but everything that ive taken a rag to on it wipes right off. make an offer Link to comment Share on other sites More sharing options...
nurkvinny Posted April 27, 2005 Report Share Posted April 27, 2005 There's a lot more to "a 383 set-up" than the bore. Has it been clearanced? Link to comment Share on other sites More sharing options...
XChris1632X Posted April 27, 2005 Author Report Share Posted April 27, 2005 i am not sure about anything else towards a 383 setup. like i said i didnt personally have the work done. but i know that it was machined with the 383 crank in mind and when my friend bought it he said it would just need the finishing hone Link to comment Share on other sites More sharing options...
XChris1632X Posted May 2, 2005 Author Report Share Posted May 2, 2005 ttt Link to comment Share on other sites More sharing options...
XChris1632X Posted July 13, 2005 Author Report Share Posted July 13, 2005 i also have a set of vortec heads with springs and a edelbrock vortec intake to sell with the block. Link to comment Share on other sites More sharing options...
desperado Posted July 13, 2005 Report Share Posted July 13, 2005 What are the casting numbers on the heads? What prices are you asking for these items? PM me the prices pls. Link to comment Share on other sites More sharing options...
ridenred27 Posted July 13, 2005 Report Share Posted July 13, 2005 Originally posted by desperado: What are the casting numbers on the heads? What prices are you asking for these items? PM me the prices pls. +1 Link to comment Share on other sites More sharing options...
Recommended Posts