What else is needed at 500+ rwhp in my C5Z?

[hpfiend]

Hey all-

 

Thinking about adding a blower to the Z06.

 

Other than the kit (by A&A) which supposedly includes everything to make the power except for a tuner and wideband O2 what other supporting mods are necessary?

 

I am thinking:

Clutch

Catch Can

Racelogic ($$$) or hopefully copy 2010 launch control somehow using HP Tuners

DTE Brace

PFADT Trans Brace

 

Or do I need to start also looking at upgraded transmission and halfshafts/rearend?

 

I do not plan on putting anything stickier on than my street nitto NT05s or pilot sports (hence the racelogic- if the ZR1 can do it with 638 flywheel hp on street tires I should be able to figure it out)

 

Thanks!

Edited March 27, 2011 by hpfiend

[Linn1647545492]

Fuel, you will need a new pump and injectors if it doesn't come with the kit.

[hpfiend]

Thanks Linn for your post, those are included in the kit- it says a pump or kenne bell boost a pump (I am guessing depending on year of car?) and injectors.. here is the link:

http://www.aacorvette.com/superchargers/index.php?main_page=product_info&cPath=1_14_43&products_id=81

 

There is a kit available for 500.00 less without the pump and injectors so I do need to check how much those are alone...

[MrMeanGreen]

Walbro fuel pump IPS carries for about $90 and the injectors you can pick up used on LS1Tech for around $200 for 60lbers like I run.

[Ef8sirJunkie]

the new aeromotive in tank fuel pumps are getting great reviews from what i understand. looks like IPS is a distributor as well.

[Sam1647545489]

Depending on how you drive, the trans will eventually start to suffer.

[DTM Brian]

A D1SC is calling my name for mine along with a set of LT's