Coaster Posted March 9, 2016 Report Share Posted March 9, 2016 Got the car aligned this afternoon so this project is finally done. Jump to the bottom for a before/after stance shot if you get bored... I ordered my car without the Performance Pack, which was on purpose since lots of people end up swapping most of the PP parts out. The ride was nice but a little too squishy on the backroads. My goal was to get things up to PP level or better. Parts List: BMR CJR001 - Chassis Jacking Rail UPPER MOUNT - 2015 FORD MUSTANG PP (FR3Z3A197B) SHOCK ABSORBER ASY - 2015 FORD MUSTANG PP (FR3Z18124AB) BMR FC003 - Camber Bolts, Front, 2.5 Degrees Offset BMR ELK012 - End Link Kit For Sway Bars, Set Of 4 BMR SB043 - Sway Bar Kit With Bushings, Front (SB044), Rear (SB045) BMR SP080 - Lowering Springs, Set Of 4, Performance Steeda S550 Mustang Adjustable Differential Bushing Insert System - Urethane BMR TCA045 - Vertical Link, Rear Lower Control Arms, Spherical BMR CB005 - Cradle Bushing Lockout Kit TR005 Toe Rods, Rear, Double Adjustable, Rod Ends BK055 - Bearing Kit, Lower Control Arm, Rear Ford Racing Knuckle to Toe Link Bearing Assembly Ford Racing Mustang Jounce Bumper and Hardware Pack SHOCK ABSORBER - 2016 FORD MUSTANG PP (FR3Z18125W) http://i.imgur.com/QGDXxbTl.jpg So step one was the jacking rails. They made getting the car up in the air super easy and it was rock solid on my heavy jack stand set. http://imgur.com/zkwo2Qml.jpg I tore into the front first since it was my first time actually unmounting a spring from a McPherson strut. I had no real issues in the front other than the sway bar bolt under the alternator. A ratcheting end wrench would have saved a ton of time taking it off. http://i.imgur.com/Fog46Apl.jpg http://i.imgur.com/4kzrvrFl.jpg Next up was the rear. My main goal the first day was to get the lower control arms off so I can try to swap the BK055 in. The front inner control arm bolt was tough to get broke loose, finally got it with an end wrench after I took off the toe rod and attacked it from the bottom. I tried to move the bushing with the FTBR bushing press kit. I finally gave up and took it to Lucore so that was my day one stopping point. http://i.imgur.com/E0sW5BUl.jpg Day two started with getting the diff inserts in and the cradle bushing lockout kit in place. Having the cross bar for my jack really helped when moving the cradle around. Diff bushings were easy other than the drivers side front. I had to loosen all the cradle bolts and push the cradle back as far as possible to get the bolt and bushing slipped between the cradle and gas tank. http://i.imgur.com/EWhx2Syl.jpg http://i.imgur.com/7duJ5K6l.jpg Then came knuckle to toe link bushing. Since my car came with PP toe links I could have reused the bushing from them. I wanted to be able to put the car back to stock eventually and didn't feel like trying to press it out it was worth is so I just bought the FR ones. Pressing the bushing out of the car would have been much easier if I could have gotten the car a little more off the ground or I had a slightly shorter breaker bar. It was too much torque for a ratchet and my impact wrench wasn't moving it on full. Same issue pressing them back in, other than that no big deal. http://i.imgur.com/CP7fw8Gl.jpg Here are some comparisons of the stock vs new parts: http://i.imgur.com/4jtoFzzl.jpg http://i.imgur.com/33nUSOtl.jpg http://i.imgur.com/ODgku1Ul.jpg Everything else went back together smoothly. http://i.imgur.com/ZUpN9cLl.jpg http://i.imgur.com/aQY3k1Hl.jpg http://i.imgur.com/viwRUa6l.jpg I took the car to Lucore to align it. They did a great job on the alignment, even weighted the drivers seat so it would be setup for me. Before/After: http://i.imgur.com/wcQkVJpl.jpg The car handles and rides great so far. I was surprised at how decent the ride is considering the amount of rubber removed from the rear. There is a tiny bit of diff noise but you can barely hear it over my exhaust. Only other noise is a little drive-line clunk that is audible when lifting off the gas at lower speeds. Quote Link to comment Share on other sites More sharing options...
-Alex- Posted March 9, 2016 Report Share Posted March 9, 2016 Stance looks good and I really like that color, is that Magnetic? How did your upgrades compare to the cost of the PP option? Quote Link to comment Share on other sites More sharing options...
POS VETT Posted March 9, 2016 Report Share Posted March 9, 2016 I'm a wee bit envious of your jackstands. I've been contemplating those for over a decade. Quote Link to comment Share on other sites More sharing options...
Miller Posted March 9, 2016 Report Share Posted March 9, 2016 Super jealous of your color. I didn't realize that's what you had. Nice parts list too. Quote Link to comment Share on other sites More sharing options...
Coaster Posted March 9, 2016 Author Report Share Posted March 9, 2016 Stance looks good and I really like that color, is that Magnetic? How did your upgrades compare to the cost of the PP option? It's Guard metallic, it's green in the sunlight and looks dark gray/black in shadows. Very hard to take pictures of. Parts were about $1700 when I bought them. Since then BMR revised their prices upwards quite a bit, several parts doubled. Factory PP option would have been $2500. Really the only PP options left that may have been useful are the bigger brakes and radiator. The base breaks I've never pushed to fading on the street or in autox and I'm not really planning to do any HPDEs. The stock radiator also seems very adequate since on the rally last summer we drove 8 hrs through Georgia then pulled the car onto Roebling Road without cool down when it was still 100F out. I was hitting ~125 on the straights, the only overheating was my poor tires melting off. Quote Link to comment Share on other sites More sharing options...
Coaster Posted March 9, 2016 Author Report Share Posted March 9, 2016 I'm a wee bit envious of your jackstands. I've been contemplating those for over a decade. I needed a new set of stands and wanted ones that could deal with the truck or camper also. Those things are rock solid. Quote Link to comment Share on other sites More sharing options...
Aaron Posted March 9, 2016 Report Share Posted March 9, 2016 Looks good. Stance looks good and I really like that color, is that Magnetic? How did your upgrades compare to the cost of the PP option? Guard Green PP is 2500 retail, but nobody pays retail for a mustang. I'd have paid that for the brakes and coolers alone, the suspension upgrades are meh, so I agree with Brian there. Quote Link to comment Share on other sites More sharing options...
Dr. Apex Posted March 9, 2016 Report Share Posted March 9, 2016 Very nice! I'm planning on the bushing inserts, lockout kit, some better shocks and sways to start out. Quote Link to comment Share on other sites More sharing options...
DKilbourne Posted March 9, 2016 Report Share Posted March 9, 2016 Awesome. Get rid of that shitty, deflecting, rubber bullshit. Should be way better off. Quote Link to comment Share on other sites More sharing options...
88lx5oh Posted March 9, 2016 Report Share Posted March 9, 2016 great job! bet it is a world of difference Quote Link to comment Share on other sites More sharing options...
DKilbourne Posted March 9, 2016 Report Share Posted March 9, 2016 great job! bet it is a world of difference Are you close to hiliard? If so, in need a ride. Quote Link to comment Share on other sites More sharing options...
Bogie89 Posted March 9, 2016 Report Share Posted March 9, 2016 Nice. Thats a hell of a lot of work. Ive been to lazy to install all my suspension stuff cause its cold lol. Quote Link to comment Share on other sites More sharing options...
88lx5oh Posted March 9, 2016 Report Share Posted March 9, 2016 Are you close to hiliard? If so, in need a ride. Marysville Quote Link to comment Share on other sites More sharing options...
SpaceGhost Posted March 9, 2016 Report Share Posted March 9, 2016 I'd like to do rails too, but they are not made for the vert I am told. Quote Link to comment Share on other sites More sharing options...
Coaster Posted March 9, 2016 Author Report Share Posted March 9, 2016 I'd like to do rails too, but they are not made for the vert I am told. I'm not sure if Steedas will or not. I've never been under a vert so I'm not 100% sure what the additional braces look like. Quote Link to comment Share on other sites More sharing options...
Aaron Posted March 9, 2016 Report Share Posted March 9, 2016 Jacking rails seem like a good idea, but I can't get my head around the price. Quote Link to comment Share on other sites More sharing options...
Coaster Posted March 9, 2016 Author Report Share Posted March 9, 2016 Jacking rails seem like a good idea, but I can't get my head around the price. Yeah the post increase price on those is hard to swallow. $260 now, I only paid $150 with free shipping. Quote Link to comment Share on other sites More sharing options...
Aaron Posted March 9, 2016 Report Share Posted March 9, 2016 Yeah the post increase price on those is hard to swallow. $260 now, I only paid $150 with free shipping. Holy fuck, I thought the 160 or whatever they used to be was high. 0% chance of the increased price. Quote Link to comment Share on other sites More sharing options...
Stimmel1647545512 Posted March 9, 2016 Report Share Posted March 9, 2016 Throw some wheels on that thing! Quote Link to comment Share on other sites More sharing options...
99StockGT Posted March 9, 2016 Report Share Posted March 9, 2016 Glad to help get this portion of the project done! From the specs we dialed you in for it should be quite a fun ride to sling through the corners. Let me know if there's anything else we can help with down the road! Quote Link to comment Share on other sites More sharing options...
Coaster Posted March 9, 2016 Author Report Share Posted March 9, 2016 Throw some wheels on that thing! Going to be Fall or next spring. The rally this summer is not going to be cheap and will eat up all my fun money. Quote Link to comment Share on other sites More sharing options...
-Alex- Posted March 9, 2016 Report Share Posted March 9, 2016 I was thinking of the green color when I said Magnetic, didn't realize Magnetic was a gray. I haven't seen the green in person yet and have been interested in it since it was first announced. Looks good! Quote Link to comment Share on other sites More sharing options...
Fiji ST Posted March 9, 2016 Report Share Posted March 9, 2016 Looks awesome Brian! Are you bringing it out to the open house Friday? Quote Link to comment Share on other sites More sharing options...
Coaster Posted March 9, 2016 Author Report Share Posted March 9, 2016 Looks awesome Brian! Are you bringing it out to the open house Friday? Yep looks like nice weather for that. Cars and Coffee looks like a wash out though. Quote Link to comment Share on other sites More sharing options...
Aaron Posted March 9, 2016 Report Share Posted March 9, 2016 what alignment specs did you use? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.