-
Posts
4,999 -
Joined
-
Last visited
-
Days Won
13
Content Type
Profiles
Forums
Gallery
Store
Calendar
Posts posted by RidersDiscount
-
-
Recently, Spiegler added two new colors to the wide range they already had available. Now, you can also choose either pink or yellow brake line colors for your custom motorcycle brake lines!
-
pig? im' not up to with the cool lingo you guys are throwin' down
Not so much with the grammar either.
-
Installing the two communicators included with the Scala G4 Powerset listed above is a quick and simple task. Each kit gives you the option of either clamping the communicator bases to your helmets or, you can use the included sticky pads for helmets that don’t have any space between the cheek pad and the shell. Here, we installed a Scala Powerset on a pair of HJC RPS-10 Ben Spies Monster Replica Helmets using the clamp mechanism. As you can see, routing the wires behind the comfort liner makes for a clean installation.
The noise-canceling microphone’s boom can be bent for a perfect position in front of the rider’s mouth.
After about fifteen minutes of work (we were taking our time here!), the Powerset’s pre-matched pair is ready to go!
For those of you with open-faced helmets, the Scala system works there too!
-
PM sent, thanks!
-
bahhhh!!! needs to be for an 08
Sorry!
-
PM's on the way
-
Ooohhh... It seems like I always need one more headset. this would give me five!
You can never have enough!
-
Word of advice on the clear be patient and apply slowly so you get all the air bubbles out or they will show through the clear it really looks like shit.... My buddy bought clear after I got mine and he slapped them on real quick they aren't on anymore he got tired of the air bubbles.
It pays to take your time, thanks for your input.
-
How does I attach to your lid? Stickytape?
It uses a clamp setup.
-
Get a Scala G4 Powerset for $289 shipped to any address in the lower 48 states! That’s $200 off retail!
The Scala Rider G4 Motorcycle Headset is the latest intercom system from Cardo Communication Systems. The G4 allows up to one mile of voice-activated bike-to-bike communication between two bikes with passengers or three separate riders. The device also works with your mobile phone to receive incoming calls with either the touch of a button or by voice command. You can even receive audible instructions from your GPS system or listen to an MP3 player via Bluetooth technology too! The built-in FM tuner permits you to listen to the radio, which is especially nice on longer rides. You can expect ten hours of talk time or one week of standby on a single charge.
The device fits to most helmets without permanent modification by a simple clamping mechanism. Dual low-profile speakers are Velcro-backed to stay in place within your helmet and a noise-canceling microphone boom is adjustable so you can position it exactly where you need. The narrow wires are easily hidden behind a helmet’s comfort liner and stay out of the way. Velcro pads are also included for installing the system on helmets that are less-than-suitable for the standard G4 Powerset attachment scheme.
Each Scala Rider G4 Powerset comes out of the box with two communicators as a pre-matched pair, all you have to do is charge it and you’re ready to ride!
You can read more about these on our website but you gotta call Mike at 866.931.6644 ext 804 to get these at this killer price! If you have any questions, please feel free to send a note to FORUM at RIDERSDISCOUNT dot COM with SCALA G4 POWERSET in the subject line and we’ll get back to you right away.
Two communicators are shipped with each Powerset system!
The G4 Powerset comes in a nifty box that has everything you need for a simple installation into two separate helmets.
This is one half of what’s in the box: charger, USB cable, communicator, mounting pads, MP3/mobile phone jack, wipes and even a spare boom cover.
A minimalist design is what’s attached to your helmet. For better performance, the microphone boom has a colored tab on it to denote which side should face your mouth.
This is the heart of the G4 system. Simple buttons are easy to feel with a gloved hand.
A USB connector is built-in for charging and easy firmware updates.
Convenient carrying pouch protects your communication device when it’s not on your helmet.
Sold as a pre-matched pair, all you have to do is install the bases on your helmets, charge the communicators and you’re ready to go!
- 1
-
PM's on the way, thanks!
-
A favorite of street riders and racers alike, StompGrip tank pads make your life easier by reducing fatigue while at the same time, increasing rider confidence. This is done by employing a patent-pending elastomer material which gently grips your leathers to provide greater control of the bike with less effort. The elastomer material isn’t super abrasive or otherwise damaging to your leathers like grip tape can be. It’s designed to wear out and be replaced after grip levels decline – similar to tires, only these tank traction pads last a lot longer! Every Stomp Grip pad is specifically designed for each model and is held in place with a strong 3M adhesive that goes on easily and, should you need to have your tank painted, comes off clean. Clear and black versions are available for most bikes so if you have some special graphics you want to show off, go with the see-through clear version!
StompGrip traction pads are not yet available on our website. To order yours, call Mike at 866.931.6644 x 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with STOMPGRIP PADS in the subject line and be sure to include the model/year of the motorcycle you’re riding and whether you want clear or black so we can get back to you right away.
StompGrip traction pads are designed to fit on the side of your bike’s fuel tank – the area where the most grip is available for hanging off. After installation, you’ll find it takes less effort to move around and hold onto your machine.
Black StompGrip for BMW S1000RR.
Clear Stomp Grip for BMW S 1000RR.
Clear StompGrip pads for Ducati 848, 1098 and 1198.
Black StompGrip pads for Honda CBR1000RR.
Clear Stomp Grip pads for Honda CBR1000RR.
Black StompGrip for Suzuki GSX-R1000.
Black StompGrip for Suzuki GSX-R600 & GSX-R750 K8.
Black Stomp Grip for 2011 GSX-R600 & GSX-R750.
Clear StompGrip for the 2011 Suzuki GSXR600 / GSXR750.
Daytona 675 StompGrip traction pads.
Yamaha YZF-R6/S StompGrip traction pads in clear color.
YZF-R6v Stomp Grip traction pads in clear.
-
Holy crap thats a good deal!
Yes it sure is!
-
PM sent, thanks!
-
easy clean up
Yep!
-
RidersDiscount.com has a killer deal for 2003-2004 Yamaha YZF-R6 owners that need a new shock! Now, you can get a brand new Öhlins YZF-R6 shock for $599 with free shipping to any address in the lower 48 states. Öhlins 46 PRXLS shocks feature separate, adjustable high and low speed compression circuits along with adjustable rebound damping which all can be changed with the twist of the appropriate knob. A remote preload adjuster is fitted as well which you can mount to your R6’s subframe. For those interesting in tweaking the Yamaha’s geometry, these shocks can be adjusted for length too! And, because many suspension tuners and racers have seen this shock before, there’s plenty of good data available for getting your bike set up correctly with this shock.
We’ll send this shock anywhere in the lower 48 states for $599!
We have a limited number of these shocks on hand and ready to ship. Simply call Mike at 866.931.6644 x 804 to order while supplies last!
All Öhlins 46 PRXLS Shock for Yamaha YZF-R6 will be shipped with a 105nM spring.
The shock’s length can be adjusted via the blue and silver nuts at its bottom. Also, the knurled black knob controls rebound damping performance.
High speed and low speed compression can be adjusted here.
A remote hydraulic preload adjuster comes with a bracket fitted so it can easily be attached to the R6’s subframe.
-
If I still had my trailer I'd buy one of these.
You could also put in your kid's bedroom possibly?
-
We’ve been very satisfied with the Blingstar cabinets we’ve installed in our race hauler. They’ve proven to be very durable and have withstood some particularly rough Illinois roads near Autobahn Country Club and the more routine trips over to Grattan Raceway and Gingerman Raceway. Our word of advice goes towards making sure you don’t install any of these trailer cabinet accessories in a way that would require you to re-arrange your proven packing scheme. We carefully laid out ours with this in mind.
The dual helmet bins at the front of our trailer are an excellent place to store spare knee sliders, de-ionized water, boots and gloves. We also hang our leathers from the rack and keep the tie-down there for an easy reach when loading the trailer.
Oil, cleaners, brake fluid and water wetter have all found a home in these cabinets. The towel rolls at the bottom, true to their design, don’t unspool themselves either. It’s nice rolling into the paddock with everything you need ready to go.
Bumpy roads and heavy use haven’t dampened our enthusiasm for Blingstar trailer accessories. They’ve worked flawlessly from day one!
-
These look SICK in person!!
Yep, I have said it many times before, pictures do not do it justice..
-
I'll jump in and post some positive comments for Riders Discount. I purchased a Firstgear Silverstone tailbag from Mike last week. It showed up on Thursday, just in time to pack for Indy. Great price, great service. Thanks again Mike!
You are very welcome!
-
Lots of you have been asking and the wait is finally over – Ben Spies Monster Replica HJC Helmets are now in stock and shipping from RidersDiscount.com! Recently introduced as HJC’s new flagship model, the RPS-10 helmet is one of the lightest full-face helmets we’ve ever handled and features a unique secure visor latch mechanism, adjustable ventilation and a fully-removable, moisture-wicking liner. It all adds up to a helmet that’s very comfortable on the road and the relatively low weight of the Snell M2010-approved shell reduces fatigue on the neck and shoulders, especially on longer rides. Swapping out RPS-10 face shields is simple too, so don’t forget to ask about what colors we have available and be ready for the road when you open the box!
For more information and expert sizing guidance, call Mike at 866.931.6644 x 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with HJC BEN SPIES MONSTER REPLICA in the subject line and we’ll get back to you right away.
The HJC RPS-10 Ben Spies Monster Replica Helmet.
Just like his original RPS-10 Limited Edition Replica helmet, only in black and with Monster Energy logos!
Ben Spies’ Monster Helmet.
HJC Monster Logo helmet.
The RPS-10 helmet was developed with feedback from the race track by Ben Spies himself!
-
What a great weekend, I am back in the office.
-
We'll be out of the shop from now until Monday 29 August enjoying the Indy MotoGP event. That goes for the rest of our sales team too. We apologize in advance for the inconvenience but hope that you too, will get to enjoy the races.
In the meantime, check out our facebook page for periodic updates from the Indy GP paddock! www.faceboook.com/ridersdiscount.com
See you Monday!
-
Bazzaz Performance has developed their QS-4 USB for the 2011 Kawasaki ZX10R to be a plug-and-play system that allows full-throttle clutchless shifting. What's really great about this system is that it does not require any additional components to work properly on your Gen 4 Kawasaki. Everything you need for installation is included in the box and it comes preset with kill times programmed specifically for the 2011 ZX10R. Software is also included which allows you to easily tweak kill times to your tastes!
Simply install the box in your Kawasaki, replace your OEM shift rod with the included sensor from Bazzaz, route the wires and you're ready to go. Bazzaz even includes zip ties for a clean installation! Please be sure to specify whether you want a reverse or standard shift pattern.
Mic Doohan IoM TT Replica Helmets NOW AVAILABLE!
in Sponsors
Posted · Edited by RidersDiscount
Commemorating Mick Doohan’s visit to the Isle of Man TT earlier this year, Arai has created a new rendition of the Australian’s iconic Arai Doohan Replica helmet. The design is certainly true to the previous iterations in terms of looks with a few tweaks added to give it a TT feel. Gone is the koala on the back of the lid, having been replaced by a map of the Mountain Course and there’s no more blue either. Gray and silver colors are given a bit of sparkle and a few TT logos have been thrown in for good measure. Overall, this is what a true Arai Corsair V is all about – top notch looks to go with its stellar comfort and superior ventilation.
These are so new that they’re not available on our website yet. For expert sizing guidance and fast shipping, call Mike at 866.931.6644 x 804 or send a note to FORUM at RIDERSDISCOUNT dot COM with ARAI DOOHAN TT REPLICA in the subject line and we’ll get back to you right away.
The Arai Corsair-V Mick Doohan IoM TT Replica helmet fitted with an optional Corsair-V Faceshield in dark smoke (sold separately).
Of course, Drudi Performance was responsible for the design of this Arai Mic Doohan helmet.
The three legs of the IoM TT are tastefully depicted on a few spots of the helmet’s exterior.
Drudi Performance markings are also present on the chinbar and here, on the backside of the helmet. For the true collector that does not wish to use this on the road, it is possible to remove the SNELL/DOT sticker on the back of the helmet.
Don’t forget to ask about getting a visor for this helmet when ordering!