Dave1647545494

I'll trade you a 94 dodge shadow with the same mileage and 400 bucks for it

I'll trade you a 94 dodge shadow with the same mileage and 400 bucks for it

just as I get my shadow all togehter including making the AC work assembling the interior and finishing off the tranny swap the stupid transmisson in my dakota decides it no longer wants to go in reverse. I already put a stick in the shadow becuase the automatic died has anyone else on here with a chrysler product had automatic tranny problems or is mine just fucked from getting sprayed too many times? also if anyone sees a 98-04 dakota in the junkyard with a good transmisson in it let me know thanks

if your going to mount it right on the bottle use the kit the nitrous comapny sells I used the NX bottle mounted guage it was reasonable priced and accurate

I'm a carpenter pressure treated lumber nothing else will work minimum 36" in the ground if your going to beat on it go 48" you need to use hot dip galvanized or stainless steel fasteners anything else will rot away in a matter of months attatch the bands to the posts with lag bolts the floorjoists are going to require joist hangers and special nails use screws to hold the decking down. if you can show me a picture of what you want I can make you a material list so you can estimate your costs hope this helps use the 80lb bags of quikcrete concrete mix you just have to add water

check the distributor cap and the rotor it probably is getting moisture in it

anything going on? I know lots of people don't have to work tomorow

I can give you a moped if you want it needs some work but its free

should be out tonight barring anymore unforseen unpleasantness

awesome I'll call ya

need a shifter cable for a 5 speed dodge shadow the shifter cable from pretty much any fwd 5 speed 4 cylinder chrysler product from 90 to 94 will work thanks

well don't let it haze on there for hours and it rubs out pretty easy. you can always put it on by hand and buff it with a machine saves alot of time.

do you want this thing or not?

no pictures but your more than welcome to come look at it anytime. I drove it down the street tonight and everything worked fine. I have to finish up a few things and pick up the turbo stuff and it will be ready to go. lemme know

go to the flea market at ceasar creek or the red barn in pataskala do not pay more than 12 dollars for a set of tags.

I can sell you a 94 dodge shadow in that price range and give you everything you uneed to put a turbo on it. (factory parts) lemme know its a five speed 2 door car. its currently lowered swapped to a 5 speed new front seats newer tires new front clip (from a plymouth cuase they look cooler) I'm picking up all the stuff manifolds turbo harness and ecu to go to a turbo all factory chrysler stuff that bolts in. I'll throw it all in for 900

I have always used turtlewax super hardshell paste wax. this requires arm power to put on though.

my anti virus software found a virus called Trojan horse downloader . istbar . 3 . de it has infected some program called internet optimizer but this stupid thing won't let me delete it says its protected or something how do I get rid of it?

south high drive in is still open? thats awesome last one left in town I think. might have to have CR cruise down there one weekend this summer

if he didn't write a fine on the ticket its probably going to be a couple hundered bucks

in a chevy truck the lock cylider moves a metal rod that runs down the steering colum to the actual ignition switch if you can get the rod loose push the switch maunualy and see if it will start if it won't the switch needs replaced. I woulda told you on the phone but I had to think about it and then double check in a service book. also check and make sure the clutch start switch is good some switches kill the starter and some just kill the ignition. hth

if you think your going to find anything better than 300 I want whatever your smokin on cuase that shit must be good. you can't do it yourself that cheap. I wouldn't touch a motor swap for under 500 bucks and even then I'd be losing money on the deal

anybody know how to rebuild one of these? I can have it out and ready and a rebuild kit ready to go. all ready has a trans go shift kit installed. if a bench rebuild doesn't come with a warranty wheres a reasonable plae to get one rebuilt I can't seem to get a price quoted under 1000 dollars and no way am I paying that much when the stupid rebuild kit is only 150 dollars. hell I'll even help someoen do it I just don't have acces to the special tools it requires. thanks

hit the store up in tallmadge on tuesday cuase I needed some parts I couldn't wait for very good customer service I told them what i wanted on the phone and it was waiting for me when I got there.

I'm interested in the drivetrain if you part it out. motor trans harness and ecm