Dave1647545494

you can spray brake kleen or carb cleaner near a suspected vacum leak if its leaking it should suck it in and change the idle a little bit

when spring comes hit the yard sales you can find a nice older american made vice for about 100 bucks..... stay far away from any of the china crap thats out right now unless you want to replace your vice all the time or hurt yourself

its fun to watch people shovel dirt on your coffin

+ infinity

jsut post whore some its really not hard to do......

if you only need the short block your good if you need a drop in long block its gotta be 92-94

dash integration module controls the headlight relay via the parking lamp relay wich is located under the left rear seat and control the ground on the green wire at terminal 85 on the headlight relay switch signal is sent directly from the headlight switch to terminal 86 on the headlight relay this terminal should show 12 volts when the switch is on terminal 87 is the main power feed and should be hot at all times terminal 30 should be hot when the switch is on if you have power at relay terminal 30 and its dead at the headlight fuse check for a broken or damaged wire between the relay and the fuse if the clicking noise you here is the dash integration module and the parking light relay doesn't power up the check the parklight relay if its good replace the dash module hth

we had Icons on sale buy one get one all last month...... napa blades are made by trico..... i keep anco bosch and rainx in stock

junk.... and the older ones use british standard size fasteners different from metric or us standard

call me with year and model see if I can help you out on a new one

Z71 is an RPO code for a taller suspension only..... it could be ordered on any chevy or gmc truck starting in 1988

as far as I know its still for sale

babbit bearing

you can look into the alternator, but it probably needs a relay control module,, thats whats responsible for raising engine rpm under higher loads like having the ac or heat on its also possible that if you have it set on defrost wich kicks on the ac compressor to dry the air that the compressor might be going out as well

close there is a uranium enrichment plant in piketon that was going to be converted to nuclear power plant, but I don't know if it ever got approved....

if you don't want the extra soap and stuff thats in washer fluid injected into the motor use airbrake antifreeze (100% methanol) and just cut it with water to get it where you need it

those of you who like the napa gold filters can get Wix from me cheaper...... bike is the only thing that gets special attention 20w50 lucas motorcycle racing oil and a wix filter, cars get whatever the oil change special of the month at NTB is haha

if you need parts I can get them wholesale, if its the service side I can't do anything for ya....

is there something specific about motorcraft washer fluid? if its a specific methanol content your looking for I can get concentrate and you can mix your own.....

try a different key? it may need a lock cylinder or an ignition switch..... I ran into a similar problem on a monte carlo not too long ago

you need a pretty heavy duty trailer for a backhoe murray's tool rental has just the trailers if you need one

use something durable the first time the paint chips water will start working its way in and you'll end up with rustout all over again

vegas

Power Steering Specialist Inc 690 Green Crest Drive Westerville, OH 43081-4970 (614) 882-2422

why?