Jump to content

Rocky31186

Members
  • Posts

    2,161
  • Joined

  • Last visited

Everything posted by Rocky31186

  1. I don't think there are such things as "extra tools". Sounds like you'll have to spend 80$ on the tool truck.
  2. I can't remember if that's one of the years that had wheel bearing issues or if It had just a rear speed sensor. Check the front wheel bearings for play. Or get the code read and find out which corner it's coming from. But obviously it's something to do with speed sensor.
  3. Not sure if MOOG makes one for that, but they are pretty good.. Then again its a chevy.. those things are known for bad pitmans, U joints, wheel bearings, and alternators.. among other things... Steering is always loose in those
  4. Deeez nutz? And pistachios
  5. Yeah go to a independent shop, hell even midas could do it... talk to the tech and tell him you'll give him cash.. And it will be cheaper.. My dealership charges too much for that stuff too..
  6. X2. For transmissions are the worst for that. Sounds like no one ever changed it. And it will probably start slipping afterwards. BUT, I've also serviced them after warning customers that it could happen and they run like a champ.
  7. Awesome. He said you have a nice shop!
  8. I dont have the time right now, Or I would gladly help you out.. Sounds like it will need a motor.. But you could always be lucky, you never know until you put a new belt on it. Or if your looking to sell it for dirt cheap, shoot me a pm..
  9. That's because nothing is turning on the motor. Just the crank.
  10. Pming for more info. Toyota direct needs new management.
  11. If you hear the pump kicking on, disconnect the fuel line before the filter. And check fuel pressure there. If you have pressure you have a clog. If you don't, replace fuel pump again.
  12. Maybe get a group in columbus and drive out there? So its not such a boring 30 min drive..
  13. I was trying to get some people together to go friday for blitz night.. Temps will be great for running..
  14. Did it just happen while driving or after sitting? Or did you do something that screwed it up? Cant help much without more info..
  15. Start by buying a fuel pressure tester and see what KEY ON reads.. plus cranking..
  16. Yeah that would be a good starting point too..
  17. Yes the hyundai is a interferance motor. Sounds like something stopped turning, which made a pulley eat the teeth off of it.. Maybe tensioner? Even though it is an interferance motor.. You can still sometimes save them.. I would pull the cover off, throw a new timing belt on it and see if it starts..
  18. Is it highly modded? Or just basic tune / bolt ons? Any more info on the car? Not sure if you've heard of them before, but "realtune motorsports" Are pretty good with the neons, and calibers.. You could look them up and see if they know what should be replaced..
  19. x2, happend to a friend of mine in cleveland.. Someone came back middle of the night and stole his CBR600... Had a chrome frame, but we havent seen it on craigslist.. Ill ask around at work, i know a coulpe people have talked about wanting one..
  20. Pick with a hook on the end will get it everytime..
×
×
  • Create New...