AJ

its a Dbag that lives in my neighborhood. he won't budge on his price and they can be had for half that on corvette forum.

i had about 4 sets at ricart too from base cars. and 2 sets of C5.

tomorrow is the first autocross of the season so this newb more than likely won't be at C&C

every time i do they never get back to me. Z06 mufflers are cheeper than NPP mufflers because they are different inside and don't sound as good as NPP mufflers. C6Z mufflers are 12" tall and i have less than 7" to work in. C5 mufflers enter and exit on the same side so those won't work either. i need 2006-currant Z06 only mufflers. like this from slip connector to tips. http://i25.photobucket.com/albums/c56/rr427/IMG_0583.jpg

maybe.

looking for a set of C6Z mufflers. can be had for around $300 on corvette forum but though i would check here first so i don't have to wait for shipping.

relay powers the fuse. the relay has one constant power and then the DIM sends another power and ground to the relay. there are two fuses, one for the right and one for the left that come from the relay.

want to trade for stock valve covers?

just sayin.

your a tech, you don't get over time if you get flat rate at all. your out of luck.

not all of them are like that. i have a 1SS and there are no buttons on the wheel at all.

define free? based off what it sells for new its almost free.

you know an SS hood would make it look better.

function>form

TBSS had a NAV unit as well. its still pretty close to a 2002 design from another company.

http://chevyfan.files.wordpress.com/2007/07/trail-ss.jpg

looks like on the schematic that the dash integration module controls power and ground to the low beam headlamp relay. looks like you get to start with that. i mean power to the solenoid side of the relay, thats 85 on the relay

you mean the '67? yes, yes i do.

want to buy a SS hood for that thing?

do it your self. put the diff in the freezer for the day then heat up the ring and slip it on.

hack.

<~ called it

i always thought they looked bad myself.

sears sells a craftsman professional 1/2" impact thats made by IR for around $170. i have had mine since '01 and never had an issue.

permatex "the right stuff" and GM engine sealant are two sealers that i can think of that will do this. "the right stuff" does come in a caulk tube.