SJC1000rr

If you go to use the credit card on registration time after time you have to wait 5min so the system makes sure you don't get overcharged/stolen info. Doing the rounds separately to get the discounted price. And yes, some of them have the Heavy Mini 20!

Since the website makes you wait with credit card...I'm now registered up through Round #7!

What is this too early stuff??? I have half the race season already paid for!

I didn't drop it off yet. And I never got a call back even today...

I called Forgrave Autobody twice and left two messages for Bruce to call me back. Never got a call. Called Ohio Trailer Supply today and they can take the trailer in tomorrow and have it done in a few days at about half the cost of Rock's. Will let ya know how it goes.

Will give them a call tomorrow and see what they can do for me.

Cracked from the top edge down in two places in the middle and bottom up in a corner. It needs replaced. I have the cone, but need someone who can make sure to take the old one out safely. And install the new one right with glue so there's no leaks.

So, I'm in need of the OR help to find a good place that does Enclosed Trailer repairs. The nose cone on my Carry-On trailer is cracked in 3 places now and needs to be replaced asap. I already have the replacement cone, but due to the amount of work involved I don't want to do it myself. I called Rocks Trailer Sale and they can't get me in until March 15 at the soonest and will take a few weeks to get done. Suggestions or help would be greatly appreciated! (Not my trailer, but shows which part is cracked)

*Cough* Motor *Cough*

Still waitin to hear the results!

Anything sold in Ohio would have sales tax.... Nothing you can do to get around that. As far as the levers, I guess my concern is the two? piece design. I would be afraid that the secondary part would break off or feel uncomfortable versus the single piece design. From use, what you do get/feel from them Prez? Also, the last crash I had didn't break the lever, it broke the perch to the MC which these don't appear to come with.

Got my tires in and will need to schedule a time to get the rains mounted up. Gonna burn the current DoT's up at and have ya put new ones on before Round 1.

Got the Magnaflow dual rear and K&N intake installed today/tonight. Major pita with all the rust/salt on things. Neighbor came over and helped me finish it up. Will be there by 4pm Brian!

Surprised no one has volunteered idea's yet. Its easy to say cash, but we all know that nearly impossible. 1) Offering Fuel/Lodging expenses for riders. 2) Dealer Cost or Near cost for parts/Accessories for Race-bike Only! Requirement to have Sponsorship logo on Bike. 3) Riders receive lower cost gear for free. (Gloves, boots etc) to show sponsorship, with logo's added to bike or preferably to gear provided. 4) Umbrella Girls for waiting

Looking at it as an investment more then anything. I can use the kot for hunting and so on. New inverter will will be the primary gene for racing and can be used at night for sleeping. And at the house without pissing off the neighbors. Sleeping in trailer is also a lot cheaper then hotel costs over a season!

I got my oversized kot in from Bass Pro this week to sleep in and have my North Face Zero degree mummybag. I have a Haier portable air conditioner that I hook the exhaust up to a 3" pvc pipe I put in the floor. Worked great at summit last year and kept the inside a cool 62 degrees when it was 80+ outside. As far as heat, I'm just using a small electric heater. I'm going to get a nice Yamaha EF3000ise/b that I can run quietly at night instead of the champion.

+2 on that. I would save the current PC map to your computer and download the closest map from their site to get a ballpark and save it to the pc3. Then you could reinstall the slip-on and plug in the PC making sure the correct injectors are used. (Lower ones) And you get the TPS sensor on the correct/left? side under the frame. (If same as 07 etc?) Then take it out to DTM-Brian for a few pulls with air/fuel logging to see whats going on. He'll be able to tell pretty quickly if somethings wrong with the fuel amount. As for the lights, as said..it could be a the LED's lacking a resistor. Bad wiring shorting out or a poped fuze. (Check Under seat and up on the side) I poped one on my old 04 600RR and they stopped working also. If the bike was running very rich, which it very well could have been. The plugs may have been fouled up and could probably use a replacement to make sure your getting a good spark and ignition of the fuel spray.

Why does this not suprise me! But yes, theres several teams out all around the OSU stadium. I'm not sure I would have posted the photo's, but then again it doesn't bother me since I'm use to those things. The bigger the event, the more of an invitiation there is for something to happen, and its better to be safe then sorry.

When in a dark room/area you can't see past or around the light. I've tested it and had it tested on me. When someone goes into strobe fuction, your eyes can't keep up with the light changes and your pretty much blind to whatever is behind the light. Very useful with suspects and preventing people from seeing you.

I got my TLR-1s for $105 on Amazon, shrug I do like the light, but the batteries don't last terribly long. When they get too low, the strobe fuction stops working. Just fyi..

You don't need to get a new Title just because you moved. If its a normal ohio title, there is a place on the back where you have to write down the Mileage and your info. This is where you place your current Name/Address and Signature along with the buyers. (Would be no different if you still lived in Ohio, but moved to another place) Technically, speaking...(I was a notary also) both the seller and buyer should be in front of the notary when signing the title to assure that all information is correct to the best of your knowledge. Ohio requires the notary for a title change at the DMV. I would also write up a bill of sale and have all the major information on it. (I did this when I just sold my 1000RR last week)

Registered through Round 5 now. Will wait a bit before going further into the season prolly.

As you wish my Master. (Its actually ordered).

Its waiting for stuff to come in. Ordered the Exhaust today though, if I could make up my mind on an Intake I'd finally be done. Might just do some work on the OEM and open the intake on it up a bit.