2talltim Posted October 22, 2019 Report Share Posted October 22, 2019 (edited) Big boy Vtwin cruiser platform with some POWA! The Scout has impressed the hell out of me, they are now taking that engine design to the next level. MODERN PERFORMANCE Engine Displacement: 108 cu in (1769 cc) Power: 122 hp at 5,500 RPM Torque: 128 ft-lbs at 3,800 RPM Maximum Engine Speed: 6,500 RPM Architecture: 60-degree V-twin, liquid-cooled Timing: Overhead camshafts and four valves per cylinder Transmission: Six-speed with true overdrive, constant mesh Clutch: Assist clutch https://www.indianmotorcycle.com/en-us/powerplus/ https://www.cyclenews.com/2019/10/article/indian-motorcycle-unveils-new-water-cooled-v-twin/ Edited October 22, 2019 by 2talltim 1 Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 22, 2019 Author Report Share Posted October 22, 2019 Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 22, 2019 Author Report Share Posted October 22, 2019 The New Challenger Quote Link to comment Share on other sites More sharing options...
mello dude Posted October 22, 2019 Report Share Posted October 22, 2019 54 minutes ago, 2talltim said: Big boy Vtwin cruiser platform with some POWA! The Scout has impressed the hell out of me, they are now taking that engine design to the next level. MODERN PERFORMANCE Engine Displacement: 108 cu in (1769 cc) Power: 122 hp at 5,500 RPM Torque: 128 ft-lbs at 3,800 RPM Maximum Engine Speed: 6,500 RPM Architecture: 60-degree V-twin, liquid-cooled Timing: Overhead camshafts and four valves per cylinder Transmission: Six-speed with true overdrive, constant mesh Clutch: Assist clutch https://www.indianmotorcycle.com/en-us/powerplus/ https://www.cyclenews.com/2019/10/article/indian-motorcycle-unveils-new-water-cooled-v-twin/ Jeez, that's a serious torque monster..... Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 22, 2019 Report Share Posted October 22, 2019 11 minutes ago, mello dude said: Jeez, that's a serious torque monster..... Depends what the curve looks like throughout the room range. I expect that like most v twins it will be at that torque level for a very short range. Quote Link to comment Share on other sites More sharing options...
JustinNck1 Posted October 22, 2019 Report Share Posted October 22, 2019 4 minutes ago, Tonik said: Depends what the curve looks like throughout the room range. I expect that like most v twins it will be at that torque level for a very short range. If the torque curve is anywhere near the new wing, it’s a torque monster. I actually had the front end come up last time I rode dad’s wing. Quote Link to comment Share on other sites More sharing options...
TimTheAzn Posted October 22, 2019 Report Share Posted October 22, 2019 5 minutes ago, JustinNck1 said: If the torque curve is anywhere near the new wing, it’s a torque monster. I actually had the front end come up last time I rode dad’s wing. @Tonik You must now wheelie the wing with video evidence to confirm Justin's findings. Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 22, 2019 Report Share Posted October 22, 2019 4 minutes ago, JustinNck1 said: If the torque curve is anywhere near the new wing, it’s a torque monster. I actually had the front end come up last time I rode dad’s wing. It won't, it's a v twins. It will peak at 2500 and taper off quickly after 3500 or maybe 4k. Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 22, 2019 Report Share Posted October 22, 2019 1 minute ago, TimTheAzn said: @Tonik You must now wheelie the wing with video evidence to confirm Justin's findings. Happy too, it has wheelied a couple of times. Most recently on 21 coming back from the Epic Ride. I try and hit those lights when on that road and be in front and then go WOT with speed shifts to 90. 1 Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 22, 2019 Report Share Posted October 22, 2019 I am not poo pooing this engine. 128 from an 1800 v twins is quite impressive. Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 22, 2019 Author Report Share Posted October 22, 2019 2 hours ago, Tonik said: It won't, it's a v twins. It will peak at 2500 and taper off quickly after 3500 or maybe 4k. Here is a chart from a 18 scout. The new engine is simular to the 1200 scout. Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 23, 2019 Author Report Share Posted October 23, 2019 Just heard it will have hydraulic lash adjusters. No vavle adjustments needed. Nice! Quote Link to comment Share on other sites More sharing options...
what Posted October 23, 2019 Report Share Posted October 23, 2019 2 hours ago, 2talltim said: Here is a chart from a 18 scout. The new engine is simular to the 1200 scout. Realistically with a decent tune, you could smooth that torque curve out all the way from peak at 3200 to 6200 or so. That's a pretty wide range to be sitting at the top end of your torque. If the new engine looks anything like that it's going to be a real beast. It's interesting it makes power all the way to redline, but I guess it doesn't rev out much past where it starts to drop off so... Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 23, 2019 Report Share Posted October 23, 2019 17 minutes ago, 2talltim said: Just heard it will have hydraulic lash adjusters. No vavle adjustments needed. Nice! The Wing is the first bike I have owned that needs valve adjustments. I will give @Pauly Starbucks to do it. 1 Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 23, 2019 Author Report Share Posted October 23, 2019 48 minutes ago, what said: Realistically with a decent tune, you could smooth that torque curve out all the way from peak at 3200 to 6200 or so. That's a pretty wide range to be sitting at the top end of your torque. If the new engine looks anything like that it's going to be a real beast. It's interesting it makes power all the way to redline, but I guess it doesn't rev out much past where it starts to drop off so... The wife's scout has a stage 1 tune and exhaust not sure what its curve looks like. But that thing is impressive. It would out run and perform most big boy cruisers. Its a blast to ride being so small and nimble. Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 23, 2019 Author Report Share Posted October 23, 2019 This is a nice detailed read about the new engine. https://www.cycleworld.com/inside-indians-new-powerplus-108-v-twin/ Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 29, 2019 Author Report Share Posted October 29, 2019 Another bombshell drop.....Corning traction control and ABS..... Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 29, 2019 Author Report Share Posted October 29, 2019 Features clip.... Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 29, 2019 Author Report Share Posted October 29, 2019 tour accessories... . Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 29, 2019 Author Report Share Posted October 29, 2019 couple other clips.... Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 29, 2019 Author Report Share Posted October 29, 2019 (edited) I'm highly impressed. cartiage forks, adjustable rear shock, brembro brakes, cornering TC and ABS, extended reach options for tall people, few taller windscreen options on top of the already impressive engine specs. Priced right in my opinion. $22k-$28k. Future replacement for the Connie? Maybe...LOL Only thing I see missing is top luggage. Also with a 6 gallon tank and 680 wet(full of fuel) win, win. Edited October 30, 2019 by 2talltim 1 Quote Link to comment Share on other sites More sharing options...
mello dude Posted October 29, 2019 Report Share Posted October 29, 2019 The smart lean is impressive stuff and a plus for safety. Not knocking any of it, technology marches on, but the thing is, I have seen it even with the start of ABS brakes, is that riders start appreciating less that riding is still a skill, that needs to be always learning, always looking to get better. With the new tech, many riders forget the skill part and then now depend on the tech to bail them out in iffy spots... I'm kinda saying - Skills first: Technology as backup....... as opposed to the opposite that seems to be trending... Technology first: skills second. Indian def has some impressive bikes coming out.... Quote Link to comment Share on other sites More sharing options...
what Posted October 30, 2019 Report Share Posted October 30, 2019 The idea that electronics and rider aids take away from skill is pretty stupid, especially for street riding. Even if the electronics/abs add just a tiny margin of safety over not having them, it may be the difference between avoiding a situation or getting caught up. On the track, there's an argument to be made for not running TCS/lift control/slide control/abs/etc depending on the feedback the rider is used to/wants from the bike but none of those things should matter on the street. Any advantage you can get to avoid any of the common causes of accidents should be utilized. Staying upright and happy trumps any ego trip from having no built-in safety mechanisms on the bike. On that note, I think it's great that Indian is getting into this stuff. Cruisers need to keep up with the times and they seem to have realized this. Quote Link to comment Share on other sites More sharing options...
Tpoppa Posted October 30, 2019 Report Share Posted October 30, 2019 Idk. I specifically bought a bike with no rider aids. It's fun for me. In racing, I think the over the top rider aids like gps-linked fueling and braking profiles for each corner are kind of ridiculous. There's a balance obviously, but I'd rather see the best rider win than see the best tech win. IMO, the racing in Moto 2 & 3 is usually better than MotoGP, partly because the tech advantage is minimized. Quote Link to comment Share on other sites More sharing options...
what Posted October 30, 2019 Report Share Posted October 30, 2019 (edited) 16 minutes ago, Tpoppa said: Idk. I specifically bought a bike with no rider aids. It's fun for me. In racing, I think the over the top rider aids like gps-linked fueling and braking profiles for each corner are kind of ridiculous. There's a balance obviously, but I'd rather see the best rider win than see the best tech win. IMO, the racing in Moto 2 & 3 is usually better than MotoGP, partly because the tech advantage is minimized. Both Moto3 (Honda & KTM motors) and Moto2 (Triumph motors) all teams are using the same basic build, all they can really change is the chassis. Moto2 uses electronics - Triumph tossed those (to a degree) on the new 765 Daytona they just announced. Both of those classes are built to make the real fast and talented guys claw their way to the top, not just arrive there on a golden chariot so to speak. There are some differences in bike performance based on chassis but you don't get the massive power and handling disparities you see in GP between factory teams/manufacturers and satellite teams running older bikes. The GP bikes themselves would be close to unridable without the electronics they have attached as they barely weigh more than the Moto2 bikes and they make almost twice the horsepower, it's really pretty nuts. And like I said, there are rider specific reasons for not wanting electronics active on a bike but the argument that electronics make people worse riders or have less skill is not really relevant. They are becoming a necessity and they will only become more prevalent in the future with full electric bikes. I would not be surprised if manufacturers ended up with one bike model for each riding discipline using the same ECU/electric motor, but you paid to unlock features/more power/etc, kind of like Tesla. Edited October 30, 2019 by what Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.