Jump to content

another new 1


68camaro
 Share

Recommended Posts

Thanks, have not had it out yet this year due to breaking the differential and bending the housing the end of last year. Hope to have it finished in a couple of weeks. Should run a little better. Going from a 4.10 to 4.88......
Link to comment
Share on other sites

  • 2 weeks later...
here it is.....best et last year was 10.81

 

 

http://i19.photobucket.com/albums/b165/thomas1977/camaro22.jpg

 

Thats a boy! Finally.. someone with a 67-69 on here.. lol. Neat car - even in flat black! welcome! get some specs of what you have...

Link to comment
Share on other sites

Thats a boy! Finally.. someone with a 67-69 on here.. lol. Neat car - even in flat black! welcome! get some specs of what you have...

Sit back and learn a while noob. Stay in your noob thread.

 

Welcome.

Link to comment
Share on other sites

  • 2 weeks later...
Here are the current specs....400 small block standard bore, 11 to 1's. World heads with 2.08, 1.60 valves. 640 lift roller cam. Forget the rest specs on cam. Professional Products intake. 750 Holley on a 2 inch spacer. Have 175 hp nitrous plate system but have not used it on this engine combo yet....350 trans with Transking transbrake. 9 inch Transking convertor. Stalls around 4200. Leaf springs with ladder bars. Moroso front springs. Competition Engineering 90/10 shocks front. Stock shocks moved inward to clear tires. Moroso front tires. Mickey Thompson 29.5 X 10.5 slicks. Dynomax round racing mufflers. 4.88 gear with a spool. Henry's axles with c clip eliminators.
  • Upvote 1
Link to comment
Share on other sites

Here are the current specs....400 small block standard bore, 11 to 1's. World heads with 2.08, 1.60 valves. 640 lift roller cam. Forget the rest specs on cam. Professional Products intake. 750 Holley on a 2 inch spacer. Have 175 hp nitrous plate system but have not used it on this engine combo yet....350 trans with Transking transbrake. 9 inch Transking convertor. Stalls around 4200. Leaf springs with ladder bars. Moroso front springs. Competition Engineering 90/10 shocks front. Stock shocks moved inward to clear tires. Moroso front tires. Mickey Thompson 29.5 X 10.5 slicks. Dynomax round racing mufflers. 4.88 gear with a spool. Henry's axles with c clip eliminators.

 

 

Be here...

http://i70.photobucket.com/albums/i89/xxtheonlyxx/carshowflyer.jpg

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...