Cereal_Killer Posted May 27, 2009 Report Share Posted May 27, 2009 I got an LC-1 today and I have a question about hooking it up. I know it has 2 analog outputs but I need to feed 3 things from it. Output 1 will simulate a NBO2 and feed the PCM ( I dont have a NB so thats why I have to use it). Output 2 will be 0-5 volts and feed the Linear EGR position wire at the PCM for datalogging on my laptop. Now if I also want to use the gauge with it can I just tap into the 2nd output or will trying to drive the gauge and feed the PCM cause a voltage drop and screw it all up? If I have to do without something it will be the gauge as datalogging is more important than a pretty light to entertain my passenger. Quote Link to comment Share on other sites More sharing options...
Cordell Posted May 28, 2009 Report Share Posted May 28, 2009 I've gotten a voltage drop trying to datalog with the gauge hooked up, so I unhook it. I'm just too lazy to reprogram the other output. Quote Link to comment Share on other sites More sharing options...
blacksi Posted May 28, 2009 Report Share Posted May 28, 2009 I say send that POS back before you open the packaging. I had one and went with FJO after it died within a couple of months. Quote Link to comment Share on other sites More sharing options...
Cordell Posted May 28, 2009 Report Share Posted May 28, 2009 I say send that POS back before you open the packaging. I had one and went with FJO after it died within a couple of months. I don't know why so many people bash it, mine's been doing great for over 2 years. Quote Link to comment Share on other sites More sharing options...
Cereal_Killer Posted May 28, 2009 Author Report Share Posted May 28, 2009 Is it possible to make some sort of voltage duplicator with parts i could pick up at radio shack? I almost got the UEGO but I really need the 2 analog outputs of the lc1. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.