myhondas

belated happy to ya....! I only celebrate mine when there is a 5 or a 0 at the end

Does anyone know of a Good....Great.....or Excellent Gunsmith in the Northeast Ohio area...Cleveland, Akron, Mentor, Painesville, or similar such areas? I have a few things I need done and won't trust the pieces to just the average hack that one finds at most of the shops. I guess the way I would put it is this....would you take your most valuable piece to them and have them work on it without any trepidations or concern.

Glocks are dependable but just tooooo big.Their smallest 45 (the g36) is still way bigger than the XDs or the Kahr PM

Ryan, If you need a ramp, I have one that folds in half... 12" wide by 7 ft long. I am in South Euclid on Mayfield Rd near Warrensville Center Rd. I am i the shop from 10am till 4pm.

Actually that is a red one...76 model....it was on ebay along with the honda 150 dream and the kawi police bike. Neat site for anything honda, cadillac, or corvette is...... motorera.com

NO...what we are still missing is the fact that ANY law that restricts or constrains the individuals right to carry either open or concealed, single, semi, or full auto is a VIOLATION of the 2nd.. This pretty much shows how our court has been allowed to violate the 2nd and now even the 1st & 4th are being violated on a regular basis.... http://onsecondopinion.blogspot.com/2009/02/meaning-of-shall-not-be-infringed.html

I thought it might be in Florida at first.....they're infamous for their sinkholes.

Actually, They WERE bought and sold...I had one of them...a brand new 71 AMF (bowling ball) HD sportster 883...piece of crap. Broke down on the way to work 4 times in it's first six months I owned it. I got rid of it after the fourth time. Three years later bought the 74 Honda CB750K4 and never looked at HD again except in my rear view mirror(he he ha ha LoL) Ryan, Thanks, I still ride it too.....not a garage queen.....about 825 miles on it last year.

Thanks Ryan, Appreciate your photos....especially the first one <he he...mine> Yup , there were a lot of nice ones there this year. I also liked the kawasaki in the builders exhibit that you show....and how about those NEW INDIANS....who'd of thought that they would start building them again.

That's the same as I pay to western reserve honda in mentor. mount and balance off the bike - $20 + tax, per wheel on the bike - $35 + tax, per wheel

I have the kisan headlight mod and I can tell you that I have never seen anyone confuse it with the flashing of the lights to tell someone that they can pull out. in fact, the times when it was confused with something else, they thought I was a police motorcycle coming at them. I use it especially when I have the sun behind me...it really helps make me stand out against the glare of the sun . I also have their tail light modulator and that works great also.

That poor dog is someday going to get even and it won't be a pretty sight ! ;-)

you really can't go wrong with any of the middle to high end p&s from cannon or nikon . optical zoom rating and mp and $ are a good place to start the comparison. I also consider ease of carry cause if it is not easy to carry it won't be. I have the nikon coolpic 16mp with 14x zoom. great little unit.

I have a total of 188 rounds left. 8 5rnd strip clips mixed, 50 more mixed loose, 1 box of 20 rnds of 81 NM, 4 boxes of 85 NM total of 58 rnds, The brass is 10 cents each. So everything would be $18.80 + ship. ray

Looks like a helio courior to me...you really want to be amazed...check out the one that is turbine powered ....I believe it can take off in 12 ft.

I have lots of Once Fired 30.06 National Match brass for sale. Also some 7.62/308 match brass. I also have .223/5.56 brass available. I have been selling on a few other bike forums as well as gunbroker

Try Cleveland Akron Honda near I-271 & Broadway.....I have found they are usually higher than the OEM price on most of the stuff I buy....course all my bikes are 17 yrs old or older......

This is to Chernobyl as Chernobyl is to three mile island

I am thinking purchasing a Glock G30S 45 for my primary chl/ccw weapon. Anyone have any insight on this particular piece? I was looking at the springfield xp-45 and the s&w mp also. but after they both had a safety recall recently I kind of ruled them to the back of the pack.

Up dated the original post with additional brass that I forgot to post. Extra 7.62 and the 223/556 brass

I have lots of Once Fired National Match 30.06 brass and some 7.62/308 brass for sale. Break down is as follows: 30.06 2,100 of 62 NM 1,600 of 63 NM 593 of 62 NM 747 of 61 NM 94 of 57 NM 32 of 58-64 NM mixed 7.62/308 100 of 64 NM 35 of 63 NM500 of mixed NM .223/5.56 580 of mixed I have most in 50rd ziplock bags some are in the original 20rd boxes I have 8rd clips and bandiliers the baged brass is going for .28 ea and the boxed is .30-.35 depending on the year the 223/556 brass is on stripper clips and is going for .12 ea I am located in an east suburb of Cleveland OH Shipping costs will be actual costs(no mark up) ps: I will be up at Camp Perry on Aug. 3rd (Garand Match) with flyers on this stuff. And lots more stuff

?I must b getting old. that one just went by me. 8=== ===d ~~~ ???

sorry, but put it up on feebay and it sold for real cheap .

Yup, U got it right. Has anyone ever heard of EDM. I was told by someone that that would remove the screws and leave the nuts intact. I have no knowledge of what it entails or how it is done.

When I get this done I hope to have in in a condition that is very close to original. I did it with my 74 CB750K4 and plan to do it with this one also. Yes, this one won't have the value of my k4, but as a great ride, I like to keep it as original as possible for many reasons. Yes, I want it on the road again, but only when it is been properly been restored. Here is my 74 k4 http://s564.photobucket.com/user/myhondas/slideshow/botmy