dakotart

I believe that it is a failing lifter which from what I know is a common issue on the Dodge 4.7L motors. 140k miles. Question is if I should replace all the lifters on both sides or just the lifters on the ticking side? Any issues with only doing one side? Thanks, Rich

Sold

I took this in on a trade and kept the parts that I wanted and I'm selling the rest. Mossberg 500 12ga with 24" smooth bore slug barrel Has rifle sights, drilled and tapped for scope. Forward grip is removable. Includes brand new Blackhawk forend. Also includes a 18.5" barrel (this was originally a 28" that was cut down to 18.5") Asking $350 OBO http://i2.photobucket.com/albums/y11/junkaddress000/M500.jpg http://i2.photobucket.com/albums/y11/junkaddress000/F1.jpg http://i2.photobucket.com/albums/y11/junkaddress000/F2.jpg

I believe I have a Crucial M4 256GB drive. Have had it for 3 years or so with no issues.

NAPA in Lancaster did a hose for my Kubota.

I believe my house was setup for geothermal. There are 4 PVC pipes (2 pairs) that run out through the basement wall. The furnace was removed before I moved in so I had to install a new furnace and went with propane. I'd be interested in knowing if any company can figure out what type of system was installed.

I considered that, but it just bought a 4 pack of CFL 13w (825 lumen) for $0.88. It will still take many years to make up the difference in price.

The Canal Winchester pickup location shows price as $9.97 Brice Rd shows $4.97

oh, and the wood floor background was the flooring that was covered up.

Thanks, I'll keep that in mind. I already have the pallets ready to break down. The laid tile over one of the sheets at the garage door but didn't get to the point where they put grout in so it was a work in progress. I think they were trying to get it presentable to sell and the bank got it first.

The black uprights measured at 6' 6"

That's what I thought. I pulled up the Ikea flooring and with 8 rows left, found where they cut out a 4x16 area of the floor and replaced it with plywood. I'm planning to take some 1x6 white oak recovered from some pallets and using that to refinish the floor.

sale pending

I can check when I get back home, but I think it is 6-7 feet tall.

Modular lab desk with built in 19" rack. Includes 2 monitor mounts, 2 keyboard trays, 2 overhead bins, and shelves. Approx 6 feet wide. (power strips not included) http://images.craigslist.org/00v0v_7KER7rukDt8_600x450.jpg Original cost was $3,800 Asking $200 OBO Also have a wall mount 19" rack. approx 2 feet deep and 2-3 feet tall Will include 24 port patch panel and Cisco 2501 Router. Front swings out to the left or right. Asking $50 OBO

The previous owner of my house covered real hardwood flooring with this IKEA flooring. I pulled it up from a room in my house where it was completely out of place. Approx 250 sq feet plus 2.5 new boxes (about 65 sq feet) for a total of about 315 sq feet of flooring. IKEA number is 201.448.80. Asking $100 OBO (delivered near Columbus, but not installed) http://i2.photobucket.com/albums/y11/junkaddress000/ikea2.jpg

Adjusted descriptions and prices. Big winds coming today. Buy one of these big saws and make light work of fallen trees.

I sent you a PM on 3/23 about this but didn't get a response.

Keep in mind, that a 2000lb winch is only 2000LB on first coil on the spool. the 2nd coil of cable is less 3rd less than that and so on. When I looked at 2000lb ATV winches, that had 5 wraps/coils, the last coil was only rated a few hundred pounds. From the user manual on the 3500lb badlands winch at harbor freight Layer 1 3500lb Layer 2 2988lb Layer 3 2606lb Layer 4 2311lb Layer 5 2076lb

Current list I have four chainsaws for sale Saw 1: Husqvarna 181SE with 18" bar and chain $375 140psi - new carb kit, extra large bucking spike, no decompression valve http://images.craigslist.org/00s0s_aNejw0H1oK7_600x450.jpg Saw 2: Husqvarna 288XP with no bar $400 150psi - no chain brake, decompression valve http://images.craigslist.org/00L0L_ezfvmtnyYoi_600x450.jpg Saw 3: Husqvarna 288XP with 20" bar and chain $475 155psi - top fin is missing small piece, dual felling dogs, 7th AV mount, decompression valve http://images.craigslist.org/00B0B_c07fIBnguuF_600x450.jpg Saw 4: Husqvarna 288XP with 24" bar $475 (pictured saw) 150psi - new aftermarket chain brake, dual felling dogs, 7th AV mount, new piston and ring, new top cover, new muffler, decompression valve http://images.craigslist.org/00O0O_eSY0x7k4BlF_600x450.jpg Additional photos and photos of other saws can be emailed.

Sent you a PM

I bought a used Kobota after I found a deal where a 72" finish mower and loader was included. I was looking at buying a new Kioti though. http://www.kioti.com/ I have a little over 5 acres mowing around 3.5-4 and lots of trees. In just a few years I have added a scraper blade, box blade, landscape rake, and pallet forks. I use my tractor to mow everywhere except by the house. I use a 54" Cub (really should have bought a 42") and also use it to trim next to the driveway. Also, I've heard it said, when looking for a tractor, budget for the biggest and buy the next larger size. Both my my neighbors have said they wish they bought bigger tractors.

Check out the strobist blog here. http://strobist.blogspot.com/2006/03/lighting-101.html There are quite a few different "lessons" that you can follow through.

I only used 20% (50 gal) from end of December through yesterday. But if this cold keeps up, I'm going to have to split more firewood.

The two in the first post are not available. See 3rd post.