Browning

It's annoying. I've been wondering if some thing is wrong since it doesn't do it every time.

sorry I should have worded this better. It's doing it while in drive while on a hill and you let off the brake. Most vehicles I have experience with would sit still, some even move forward.

This is the first vehicle I have owned that does this, and it doesn't always do it, even on the same hill. It is a 2005 pontiac vibe. No misses, runs great, shifts great, etc.

and I know that was probably hard to read. I wanted to type it as fast as possible so I can stop thinking about it lol

My sister 99 olds intrigue 3.5 has an unconnected vacuum hose and I am not 100% sure where it goes. I have found two possibilities. One is a port on the TB with has a cap as if it is factory done. The other is on the end of the intake plenum on the passenger side. While this hose has just enough length to attach there, just about every image of this on good show it headed towards the driver side, but with the engine covers on it's hard to see where exactly. Here is a picture of the vacuum. http://i.imgur.com/k6Z5vCd.jpg It looks to come from the underside of the body so I am assuming something to do with evaporation canister? The one vacuum I have found that has a screw plugging it off which is on the passenger side of the engine. Notice the vacuum line is in the pic. http://i.imgur.com/nXvkG4E.jpg I googled quite a bit today and most images of this motor showing the vacuum as running to the driver side, as shown http://i.imgur.com/yMYpxBC.jpg I have found this one that shows like maybe it runs to the port that is blocked off. Also notice lack of clip on firewall, like the one has above. Possible they had different setups on some models? http://i.imgur.com/F4DNRUt.jpg Since it is not my vehicle I'd like to be 100% sure before I hook it up there,in case for some strange reason it starts running like shit on here while I am not around since she lives an hour from me. If it does run to the canister, is there any reason why some one would have blocked it off?

Nothing wrong with 8, once you install classic shell

Figure it out?

won't need the disc. It should have a factory restore partition on it. So long as you know you'll lose anything you've got on it, fire it up and tap F12 on the first screen you see. If F12 doesn't work, try the "0" key as it seems some Toshiba were set like that. Should pull up a screen that lists HDD recovery, or factory reset, something along those lines. Follow instructions, win.

Visit a CB shop. Should have something like that

They worked pretty well. Still have a little clumping in certain areas but I think a block off plate would take care of that.

Going to suck if I open them up, use them and it doesn't cut good.

I was under the impression that sucking up the grass was exactly what a mulching blade is designed to do, so it gets cut repeatedly. Guess the block off would help quite a bit with that though

You use the block off on yours? Excellent. Stock blades often left clumps no matter the height or how often I mowed.

I have a 48" husqvarna like this one with a 24hp Kohler. http://machines4u.cachefly.net/machinery/45/53145/2012-Husqvarna-YTH24K48-Ride-On-Mower_196336.jpg It's mulching compatible but I don't have the block off plate for the deck. Needing new blades I went to lowes and all they had left were mulching blades. I went ahead and grabbed a 3 pack but not sure if I will need to purchase the block off or not? I'll get the plate if it's actually needed but if it will mow fine with out then what's the big deal? Stock blades sucked.

If I had to do it again I'd just buy an already built wooden shed and have it delivered. Little over a year ago we bought an arrow 8x10 metal shed kit from lowes. Arrow sells a cheap made metal foundation kit separately for those not wanting to pour concrete or build a wooden foundation so we went that route. Put it together, throw some 3/4" plywood on it and start the shed build. Putting it together wasn't as bad as it was made out to be in the reviews. You will need a helper for a couple of things once you get so much of it put together. Hundred of shitty bolts and nuts that a toddler could strip the threads out on. Shed fucking sucks even though it serves its purpose. Dents easily, starting to rust, leaked instantly which I was able to take care of with some roofing cement from the inside. Door tracks need to pretty much be polished for them to even remotely slide half way decent after the first couple of months. Right around $500 in this piece of shit once it was all said and done. Want a decent shed? Go wood or don't waste your time. edit-this piece of shit http://www.arrowsheds.com/images/storeexclusive/arrow_highpoint_shed_10x8.jpg

this, except mine is 48"

Nice. I like the wheels but they need more sidewall. Not digging the skulls though.

Not sure if they forgot to add the apron in or what but not complaining, this was all free http://i.imgur.com/AEhLTF9.jpg

Not a fan of pitts but that is a cute dog

do the whole car like that

hell, I'd use that lol

They didn't say exactly. Just sauces, an apron, tshirt and more. I'll post pics when it gets here.

channel 6,sorry lol

they will most likely replay it again when they recap

They used my sons pic on the beginning of the news just now. Any of you have it recorded, or can rewind and grab a clip of it for me? This is the pic they used. http://i.imgur.com/Wjan3BL.jpg