Tpoppa Posted October 14, 2015 Report Share Posted October 14, 2015 After 3 days of sitting I noticed the front tire on my VFR was completely flat. I refilled it and spent about 15 minutes with a flashlight looking for a puncture. No pinholes, no marks, nothing. That was about a week ago. Since I refilled the tire it hasn't lost a single psi. I even rode it about 40 miles to see if that would cause it to lose pressure. What would cause that? I'm thinking there could have been some crud in the valve stem that kept it from completely sealing. I check pressure before pretty much every ride, so I'd know if there was a slow leak over time. There wasn't. Quote Link to comment Share on other sites More sharing options...
MichaelS Posted October 14, 2015 Report Share Posted October 14, 2015 Gremlins. Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 14, 2015 Report Share Posted October 14, 2015 Cover it with Mobil One and look for bubbles. Quote Link to comment Share on other sites More sharing options...
Tpoppa Posted October 14, 2015 Author Report Share Posted October 14, 2015 Schrader valves suck. Probably debris in there. That's the only thing you touched when you refilled. That's the only thing that would have been disturbed.That's my guess, but I've never had it happen before. Quote Link to comment Share on other sites More sharing options...
Tpoppa Posted October 14, 2015 Author Report Share Posted October 14, 2015 ^^When in doubt check the neck. Quote Link to comment Share on other sites More sharing options...
Gump Posted October 14, 2015 Report Share Posted October 14, 2015 Valve stem loose? Maxp had this happen at the Gap. It was a complicated shitty event of fueled confusion that could have been simpler by having just one valve stem cap that doubles as a valve stem tool. Quote Link to comment Share on other sites More sharing options...
blue03636 Posted October 14, 2015 Report Share Posted October 14, 2015 I've never gotten head from a transgendered hooker, but that doesn't mean it can't happen. I'm calling BS on this one. 1 Quote Link to comment Share on other sites More sharing options...
whaler Posted October 14, 2015 Report Share Posted October 14, 2015 I have Michelin pilot powers loose air for no apparent reason over the years. Air back up an they are fine. If you have ever changed tires, there are major differences between manufacturers and how they fit and seat on the bead. Most of the time when properly lubed Michelin sport tires can practically be pushed on with little effort. The exact opposite to Bridgestone which can be a complete PITA. Valve would still be my fist check as mentioned above. Quote Link to comment Share on other sites More sharing options...
jschaf Posted October 14, 2015 Report Share Posted October 14, 2015 Are you absolutely sure it wasn't your kid letting the air out? Actually, Schrader valves with caps don't leak even if there is debris in the internals. As long as the seal with the rim & the exterior of the valve is intact. Did you change out the valves when you changed the tires? If not, next time, put on some Bridgeport's. My Honda shop manual says to replace the valve stems every time you replace the tires. This seems excessive & I don't know anybody who does this, but that's what they say. Quote Link to comment Share on other sites More sharing options...
zx3vfr Posted October 15, 2015 Report Share Posted October 15, 2015 Are you absolutely sure it wasn't your kid letting the air out? Actually, Schrader valves with caps don't leak even if there is debris in the internals. As long as the seal with the rim & the exterior of the valve is intact. Did you change out the valves when you changed the tires? If not, next time, put on some Bridgeport's. My Honda shop manual says to replace the valve stems every time you replace the tires. This seems excessive & I don't know anybody who does this, but that's what they say.Safety reasons. Valves are inexpensive. I was the only guy at the BMW who would replace rubber and tpms valve steams. I never understood why other techs would rip customers off on stupid crap like a tiny bit of fluid of fluid leaking from fan clutch but give me a ration of shit about a $2 valve stem or a $6 dollar tpms seal kit Quote Link to comment Share on other sites More sharing options...
Wolfman1 Posted October 15, 2015 Report Share Posted October 15, 2015 Gotta go with my grandfathers trick with dish soap. Squirt a generous amount of dish soap into a open container and put some water in. Slowly mix, you don't want suds. Use a small paint brush and run it around the beads and the valve stem. Leak will blow up a large bubble. Works every time! That's how I found a small nail in one of my tires. 1 Quote Link to comment Share on other sites More sharing options...
TimTheAzn Posted October 16, 2015 Report Share Posted October 16, 2015 +1 on wolfman's method with soapy water. That is how I've found leaks in the past. Quote Link to comment Share on other sites More sharing options...
Tpoppa Posted October 16, 2015 Author Report Share Posted October 16, 2015 ^^I would try that but it isnt leaking anymore. Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 16, 2015 Report Share Posted October 16, 2015 Mobil 1 is way better than dish soap. Quote Link to comment Share on other sites More sharing options...
jschaf Posted October 16, 2015 Report Share Posted October 16, 2015 ^^I would try that but it isnt leaking anymore.I knew it was the kid. Did you check for rocks in the exhaust? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.