Jump to content

This year's project bike


Gixxus Christ!

Recommended Posts

Dunno if you've ever tried this stuff. I use it to seal clamp hoses and crush gaskets(valve covers mostly). Aviation gasket sealer. NAPA. Even use it on head gaskets around the oil gallery passages. Aircraft don't like leaks, no place to pull over.

https://www.napaonline.com/en/p/BK_7651210

edit:  Permatex makes this too. Same stuff as far as I know.

editedit: Ok, I used to use it on everything, and still do. Even dipped head bolts in it, if they went into water or oil passages.

215796

Edited by ReconRat
Link to comment
Share on other sites

Ok, ordered clutch mc rebuild kit and a new old clutch slave cyl.  Should solve all my clutch related issues. Need to order blinkers and maybe these mufflers this weekend: Look at this on eBay http://www.ebay.com/itm/253083576244

 

As far as looks, pretty sure I'm gonna black it out. I'll have the fork lowers, wheels, fenders and backrest powder coated satin black and have the tank and side covers done in high gloss black for a little contrast. Debating on keeping the rectangle headlight and putting a sealed LED light in it or switching to a 6" round headlight.... would also like to put a later year fender on but not sure if it will work with the seat... pics once I make some more visible progress.

 

Bonus: the 1984 was the only year with 3.40:1 gear in the rear end, all others had 3.14:1. The 3.40 was put in to compensate for the 700cc motor but the following year they added a tooth to the countershaft instead and went back to 3.14:1. Because I have a 750 motor swapped in it will have shorter gearing than a stock 750 or 700, so should be quicker off the line. 

Edited by CrazySkullCrusher
  • Upvote 1
Link to comment
Share on other sites

You're likely gonna have to make your own exhaust gaskets, I couldn't find any new ones anywhere. The final drive swap is/was a common mod, my friend did it to his V65. These bikes weren't made for chasing top speed, might as well get them torques off the line. I say keep the rectangular headlight. That and the stereo horns just scream "MID 80s HONDA!" and I love it. I enjoy seeing your updates, they remind me of working on mine. "Well, I fixed that, but now this, this, and this are wabbajacked."
 

SmO4BS8.jpg

  • Upvote 1
Link to comment
Share on other sites

Not entirely sure about the outlet gaskets, but the ones between the exhaust collector and the mufflers. Tried several different retailers that listed the part as "in stock" but nobody had it. When I looked on eBay, there was one gasket. I needed two. So I just left the originals. 

  • Beer 1
Link to comment
Share on other sites

My experience was that the muffler packing gaskets are always hard to find. I don't know why. I do remember being very careful with the ones I had already in there, knowing they would be a problem if damaged. Nothing wrong with using the ones you have, but you might notice some exhaust gases getting past and leaving marks on the pipes. Try these two for hard to find Honda parts:

http://www.servicehonda.com/

http://www.cheapcycleparts.com/

or for classic bikes: Find the part number and google search for the part number. I've used that to find stuff when only a few were available anywhere. Put parentheses around the part number to lock it in on the search.

 

  • Beer 1
Link to comment
Share on other sites

Got my master cyl rebuild kit from riders discount. Put it all together and went to bleed it out. The slave cyl I got on eBay is fucked. Seals are shot and the piston is frozen. 

It's like something is trying to keep me from riding this bike....

Link to comment
Share on other sites

Ok. Ordered slave cyl rebuild kit and gasket. Riders discount actually didn't have these items so I ended up on eBay again. Side cover comes today, it better fucking fit. Put on the replacement left side hand controls yesterday too, so now I have a headlight plug that isn't melted. Yay me. Looking into an LED headlight for this and maybe put an acewell digital gauge on to make it cooler and get rid of the fucking lunch box that houses the stock clocks and dummy lights. Maybe change the bars to something less dorky.

Link to comment
Share on other sites

On 8/25/2017 at 1:10 PM, CrazySkullCrusher said:

Ok. Ordered slave cyl rebuild kit and gasket. Riders discount actually didn't have these items so I ended up on eBay again. Side cover comes today, it better fucking fit. Put on the replacement left side hand controls yesterday too, so now I have a headlight plug that isn't melted. Yay me. Looking into an LED headlight for this and maybe put an acewell digital gauge on to make it cooler and get rid of the fucking lunch box that houses the stock clocks and dummy lights. Maybe change the bars to something less dorky.

Check this vendor for old bike parts..

http://newmotorcycleparts.net/

And for bike electric connectors and shit.... 

http://www.cycleterminal.com/index.html

Link to comment
Share on other sites

11 hours ago, mello dude said:

Check this vendor for old bike parts..

http://newmotorcycleparts.net/

And for bike electric connectors and shit.... 

http://www.cycleterminal.com/index.html

That's awesome. Never heard of these sites before, thanks for the tip!

  • Beer 1
Link to comment
Share on other sites

13 hours ago, mello dude said:

And for bike electric connectors and shit.... 

http://www.cycleterminal.com/index.html

Didn't know about that one. I've been using this one; Eastern Beaver up in Canada for OEM motorcycle electrical connectors.

https://easternbeaver.com/Main/Elec__Products/Connectors/connectors.html

Edited by ReconRat
Link to comment
Share on other sites

3 hours ago, ReconRat said:

Didn't know about that one. I've been using this one; Eastern Beaver up in Canada for OEM motorcycle electrical connectors.

https://easternbeaver.com/Main/Elec__Products/Connectors/connectors.html

I've known about Eastern beaver for a bunch of years - they're OK, but you get bigger on shipping. Gone to Cycle Terminal many times and has worked out fine.

Link to comment
Share on other sites

Ok, after rebuilding the slave and master and bleeding out the lines I have a clutch again. Started it up and tried to ride it yesterday, stalled out instantly when trying to roll out on first and then the battery was dead....need to wire the voltage regulator back up so it charges the battery... 

Link to comment
Share on other sites

22 hours ago, CrazySkullCrusher said:

Rode It up and down my street. Motor pulls hard to red line. Shifts really nice. Once I replace a bunch of shit and get it painted it will be one sweet ride. Maybe I'll even keep it instead of selling it.....

The Honda V4s are sweet riding bikes.

Link to comment
Share on other sites

Going to my dad's tomorrow to harvest my hops plants. While I'm there in going to install a set of emgo reverse megaphone slip-on mufflers he bought  on his 86 magna 700. Will get to hear the mufflers I'm looking at buying without buying them first! Wish mine was as nice as his is....will post pics and maybe a video.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...