2talltim Posted October 8, 2018 Report Share Posted October 8, 2018 (edited) So I went to Lowe's yesterday to pick up some bolts. You know how you have to write on the little baggie what your buying for the checkout person. Well I was carrying my helmet in my hand and the bag rubbed up against my helmet before the marker ink dried on the bag. After trying many different solvents including Windex, non ammonia in Windex, alcohol, non-chlorinated brake parts cleaner, WD-40 and Simple Green I'm still left with this yellowish residue. Anything y'all can think of that will be safe on a matte finish that may take this off? Edited October 8, 2018 by 2talltim 1 Quote Link to comment Share on other sites More sharing options...
Steve Butters Posted October 8, 2018 Report Share Posted October 8, 2018 Magic eraser is good at removing hard to clean shit... Not sure if it's safe, but it can't be any worse than brake cleaner 1 Quote Link to comment Share on other sites More sharing options...
ScubaCinci Posted October 8, 2018 Report Share Posted October 8, 2018 Magic erasers use abrasion to do their job...I'd steer clear of that unless you've tried all other non-destructive methods. Maybe goof-off or similar? I think there are some less harsh versions. Worst case, throw some stickers on there Quote Link to comment Share on other sites More sharing options...
ReconRat Posted October 8, 2018 Report Share Posted October 8, 2018 (edited) I used to use isopropyl alcohol and ethyl alcohol (aggressive to some plastics) to clean up plastics for electronics. And I've used both on helmets. Internet has a list of stuff to try: To remove permanent marker from hard plastics, follow these simple steps. Color over the permanent marker you wish to remove with a dry-erase marker. Wipe over the area with a rag, and the permanent marker should come right off along with the dry-erase marker. Repeat if any permanent marker remains. This process works so well because the rubbing alcohol in the dry-erase marker eats through the permanent marker, while the tip of the marker acts as a little scrub brush, lifting and removing the marks. Other Household Products for Cleaning. Vinegar, baking soda, hydrogen peroxide. Even sunscreen is an option, it has alcohol in it. WD-40 is worth a try. edit: you know, it looks like the yellow ink on the bag came off and stuck to the helmet. Printer's clean ink with Stoddard solvent. Edited October 8, 2018 by ReconRat Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 8, 2018 Author Report Share Posted October 8, 2018 On 10/8/2018 at 5:41 PM, Steve Butters said: Magic eraser is good at removing hard to clean shit... Not sure if it's safe, but it can't be any worse than brake cleaner Expand On 10/8/2018 at 6:52 PM, ScubaCinci said: Magic erasers use abrasion to do their job...I'd steer clear of that unless you've tried all other non-destructive methods. Maybe goof-off or similar? I think there are some less harsh versions. Worst case, throw some stickers on there Expand Magic Eraser didn't work maybe faded it slightly. haven't tried goof off yet I ran out last time Dan was here working on his bike 1 Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 8, 2018 Author Report Share Posted October 8, 2018 On 10/8/2018 at 7:35 PM, ReconRat said: I used to use isopropyl alcohol and ethyl alcohol (aggressive to some plastics) to clean up plastics for electronics. And I've used both on helmets. Internet has a list of stuff to try: To remove permanent marker from hard plastics, follow these simple steps. Color over the permanent marker you wish to remove with a dry-erase marker. Wipe over the area with a rag, and the permanent marker should come right off along with the dry-erase marker. Repeat if any permanent marker remains. This process works so well because the rubbing alcohol in the dry-erase marker eats through the permanent marker, while the tip of the marker acts as a little scrub brush, lifting and removing the marks. Other Household Products for Cleaning. Vinegar, baking soda, hydrogen peroxide. Even sunscreen is an option, it has alcohol in it. WD-40 is worth a try. edit: you know, it looks like the yellow ink on the bag came off and stuck to the helmet. Printer's clean ink with Stoddard solvent. Expand Tried alcohol several times and just tried your dry erase trick didn't do it either. It's definitely the black ink because it was black before I started cleaning. 1 Quote Link to comment Share on other sites More sharing options...
Steve Butters Posted October 8, 2018 Report Share Posted October 8, 2018 You could try a little paint thinner with a q tip... Obviously you'd have to be careful not to ruin the finish... I'm out of ideas otherwise, I haven't ran into many things a magic eraser can't erase lmao Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 8, 2018 Report Share Posted October 8, 2018 On 10/8/2018 at 9:27 PM, Steve Butters said: I haven't ran into many things a magic eraser can't erase lmao Expand Gonna try it on @Casper then. Tim, you are fucked. Matte helmets look cool but as soon as anything happens to the paint you are screwed. Took me two of them to learn that. Never again. Quote Link to comment Share on other sites More sharing options...
Casper Posted October 8, 2018 Report Share Posted October 8, 2018 I’d soak a wash cloth in hot water and lay it over it for a little bit. Like 15-30 minutes. Then try to wipe it off. Maybe rub some Dawn dish detergent on it and let it sit also. Quote Link to comment Share on other sites More sharing options...
MidgetTodd Posted October 8, 2018 Report Share Posted October 8, 2018 (edited) Goo Gone. It works perfectly Also Goof Off. Same thing different name Edited October 8, 2018 by MidgetTodd Quote Link to comment Share on other sites More sharing options...
Casper Posted October 9, 2018 Report Share Posted October 9, 2018 On 10/8/2018 at 11:55 PM, MidgetTodd said: Goo Gone. It works perfectly Also Goof Off. Same thing different name Expand Both will mess up matte finishes. Google it. It stains matte paint. Quote Link to comment Share on other sites More sharing options...
Gixxus Christ! Posted October 9, 2018 Report Share Posted October 9, 2018 Clay bar? Quote Link to comment Share on other sites More sharing options...
max power Posted October 9, 2018 Report Share Posted October 9, 2018 On 10/8/2018 at 11:55 PM, MidgetTodd said: Goo Gone. It works perfectly Also Goof Off. Same thing different name Expand They should combine the two products. call it Goo Off Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 9, 2018 Author Report Share Posted October 9, 2018 On 10/8/2018 at 10:40 PM, Casper said: I’d soak a wash cloth in hot water and lay it over it for a little bit. Like 15-30 minutes. Then try to wipe it off. Maybe rub some Dawn dish detergent on it and let it sit also. Expand Thanks for the idea but did work. 1 Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 9, 2018 Author Report Share Posted October 9, 2018 On 10/9/2018 at 12:22 AM, GSX-Sam said: Clay bar? Expand Don't have any but I'd be concerned about the matte finish with that. 1 Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 9, 2018 Author Report Share Posted October 9, 2018 On 10/8/2018 at 11:55 PM, MidgetTodd said: Goo Gone. It works perfectly Also Goof Off. Same thing different name Expand On 10/9/2018 at 12:09 AM, Casper said: Both will mess up matte finishes. Google it. It stains matte paint. Expand Kinda what I though. 1 Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 9, 2018 Author Report Share Posted October 9, 2018 On 10/8/2018 at 10:28 PM, Tonik said: Gonna try it on @Casper then. Tim, you are fucked. Matte helmets look cool but as soon as anything happens to the paint you are screwed. Took me two of them to learn that. Never again. Expand Yea kind what I'm learning. I can only hope the sun will fade it some. Oh well just another story of the road. All the scuffs and scratches on the connie are stories to be told. 1 Quote Link to comment Share on other sites More sharing options...
blue72beetle Posted October 9, 2018 Report Share Posted October 9, 2018 Try acetone. Ask your wife if she has any fingernail polish remover. *Not responsible for fucking up your helmet* Quote Link to comment Share on other sites More sharing options...
Tonik Posted October 9, 2018 Report Share Posted October 9, 2018 Yea, try more aggressive shit. Use a q-tip. It's already fucked up. Quote Link to comment Share on other sites More sharing options...
Casper Posted October 9, 2018 Report Share Posted October 9, 2018 On 10/9/2018 at 1:17 AM, 2talltim said: Thanks for the idea but did work. Expand Maybe let it sit on the helmet for several hours? Should soften it up and wipe off. Another idea would be to find a tar/insect remover, and do the same process with the rag soaked in it sitting for a period of time. Looks like McKee’s 37 could work. Chemical Guys also has one specifically for matte finishes. The main idea is to break it down without rubbing. Rubbing will cause a shine. Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 9, 2018 Author Report Share Posted October 9, 2018 On 10/9/2018 at 1:57 AM, Tonik said: Yea, try more aggressive shit. Use a q-tip. It's already fucked up. Expand Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 9, 2018 Author Report Share Posted October 9, 2018 On 10/9/2018 at 3:26 AM, Casper said: Maybe let it sit on the helmet for several hours? Should soften it up and wipe off. Another idea would be to find a tar/insect remover, and do the same process with the rag soaked in it sitting for a period of time. Looks like McKee’s 37 could work. Chemical Guys also has one specifically for matte finishes. The main idea is to break it down without rubbing. Rubbing will cause a shine. Expand We'll see. I'll revisit this another time. Every time I try something and it fails it just pisses me off even more. Maybe one of the rainy days this week. Quote Link to comment Share on other sites More sharing options...
MidgetTodd Posted October 9, 2018 Report Share Posted October 9, 2018 On 10/9/2018 at 12:09 AM, Casper said: Both will mess up matte finishes. Google it. It stains matte paint. Expand News to me. I’ve never had it mess up anything. I use it on everything. Maybe if you spray it and let it sit it might stain. Use it like it’s supposed to be used. Quote Link to comment Share on other sites More sharing options...
2talltim Posted October 9, 2018 Author Report Share Posted October 9, 2018 On 10/9/2018 at 11:19 AM, MidgetTodd said: News to me. I’ve never had it mess up anything. I use it on everything. Maybe if you spray it and let it sit it might stain. Use it like it’s supposed to be used. Expand DON'T use it on clear acrylic or polycarbonate unless you no longer want it to be clear anymore. Ask @Danimal how he knows. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.