Tinman Posted July 28, 2019 Author Report Share Posted July 28, 2019 Okay, it took way too long to get back on this project but the new mufflers are finally done and..... I don't know if I like them. The new mufflers are a bullet style. Straight through perforated core wrapped in 1/4" of fine stainless steel wool and then an inch of a ceramic wool insulation. 2 1/2" I.D., 5" O.D., and 9" long. After getting them done, I bolted them on behind the X pipe that did not work well in my opinion with the factory mufflers. I was bound and determined to use the X pipe and I hoped it and the new style mufflers would make the proper music. Once again, I was wrong. The nasty trumpety noise was back at 2000rpm. It's a very odd phenomenon, it goes as soon as it comes. Lasts for only a narrow rpm range, maybe 50rpms and only while accelerating. I could not get it to make the same noise at any steady state rpm. But every time I passed 2000rpms while going through the gears it barked at me like an annoying jack russel terrier that wanted attention and badly. So the X pipe is no more. I cut it out of the exhaust mid section and set it on the bench thinking I could use it elsewhere on another project. The mid section was welded back together sans X, reinstalled, and ready to make better noises. The more I drive it, the more I'm growing to like it. Not sure if I'm getting used to it or if the packing is breaking down a little. I recorded a three gear pull to hear it from outside the car and I'm still undecided. I'll give it some time but at this point I'm thinking the "bypass mod" on the factory ti mufflers might be the way to go. Anyways, here's how it sounds as of now. Quote Link to comment Share on other sites More sharing options...
10phone2 Posted July 28, 2019 Report Share Posted July 28, 2019 yayyyy. looking forward to updates. Quote Link to comment Share on other sites More sharing options...
unfunnyryan Posted July 28, 2019 Report Share Posted July 28, 2019 Quote Link to comment Share on other sites More sharing options...
RedRocket1647545505 Posted July 28, 2019 Report Share Posted July 28, 2019 Please destroke this thing and throw in the lightest moving parts you can find. I want to hear it scream at 9k rpm. Quote Link to comment Share on other sites More sharing options...
10phone2 Posted July 28, 2019 Report Share Posted July 28, 2019 you sir are correct. even if the legend tinman lightens stock parts. Quote Link to comment Share on other sites More sharing options...
dq driver Posted July 28, 2019 Report Share Posted July 28, 2019 Sounds good :thumbup: Quote Link to comment Share on other sites More sharing options...
cdk 4219 Posted July 29, 2019 Report Share Posted July 29, 2019 Sounds like excellence to me! You have done the difficult, and made that sound like a flat plane crank. I enjoy the sound. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.