desperado

Since the truck isn't selling, and I need bucks for X-mas is sale time 1. MSD6BTM it's a MSD 6 with the turbo timing retard on it. New, never hooked up from what I can see. $250 http://www.jegs.com/webapp/wcs/stores/servlet/category2_10001_10002_17361_-1 2. MSD 6AL used, good working order $150 http://www.jegs.com/webapp/wcs/stores/servlet/category2_10001_10002_17361_-1 3. Holley Pro Dominator tunnel ram with 4150 (non-dominator top plate) This is for a serious motor, low RPM street motors need not apply. Needs cleaned up and I will need to find the plugs for the holes that are drilled and tapped for the NOS fogger system currently on it. This is for a Small Block Chevy $200 WITH OUT NOS KIT I do have a set of carbs for this but they will need assembled, additional cost for carbs. http://www.jegs.com/webapp/wcs/stores/servlet/category2_10001_10002_15927_-1 4. NOS Pro Shot Fogger kit used. Will need a new hard line kit to install on your application, currently plumbed for the above intake. Will also need a Y splitter and shot lines to the fuel solenoids. With a 10 lb tank. $500 http://www.jegs.com/webapp/wcs/stores/servlet/category2_10001_10002_18775_-1 5. Holley Black pump used. Good shape $100 http://www.jegs.com/webapp/wcs/stores/servlet/category2_10001_10002_14235_-1 6. SBC TPI intake w/o injectors, used $100 All bolts except manifold to head are with it. No injectors. Great for a turbo setup with a Megasquirt. Has 9th injector. With underhood harness. Off a Camaro I believe similar to one listed on ebay here. http://cgi.ebay.com/ebaymotors/TPI-intake-manifold-corvette-350_W0QQcmdZViewItemQQcategoryZ36474QQihZ013QQitemZ230057179192QQrdZ1 7. SBC motor 355, complete except valve trane parts. Needs lifters, pushrods and rockers. Have ARP rocker studs for it. This was the motor out of the Cark. I have went through motor, it suffered a broken rocker stud and two bent push rods. Lower end is fine, from the looks of it, the bottom end was balanced. There has been significant work done on the crank. Pistons look to be Mahle forged units for visual matchup. 441 casting heads with minor port work done. I am selling as a long block, it will need an intake, carb and distribotor to be complete. $700 8. MSD crank triger for SBC used $175 http://www.jegs.com/webapp/wcs/stores/servlet/category2_10001_10002_17397_-1 9. 350 Turbo trannie w/ reverse valve body, full manual and brake. Have a 3600 RPM comvertor with it. $500 10. 1980 Monte Carlo drag car, tubed, caged. Needs tires and brakes. Roller, no engine or trannie. interior gutted, have title. $2000 OBO 11. 1980 Chevy Camaro Z28. Interior gutted caged, frame tied, full aluminium dash, 6 inch lift off cowl hood, 327 .30 over, 441 heads ported, 350 trannie with stage 3 shift kit. 12 bolt rear. This was a factory 4 speed Hurst car, rare. Race or restore. Will drive home, will need tires. Body is very straight, minor rust in rocker and right side front fender. Car is currently primered but will need sanded and painted. $5000 Firm. Many of you have seen this car, yuo oknow what it is. 12. Victor jr intake for SBC $150. Used but in great shape, bead blasted, ready to polish or bolt on. This is the preferred intake for a carb blow-through setup. 13. Stal pattern SBC headers off NASCAR motor. I have a set of standard flanges to go with these, paid a bunch of money for them, will bolt to AFR 7 bolt heads $200

Got any interest in swapping for a truck??? Look at my post on the 88 F-150 if so.

Bite me! :asshole: Would you like to try to heard 30 1000 pound bulls that are mean and rather pissed off on a trailer without a cattle prod? I can get it arranged for you. They have no problem backing you into a corner and kicking the hell out of you then shitting all over you. It's big fucking fun.

I would NOT run braided line throughout. Run your hard lines to the frame locations that the factory used then go with braided from the lines to the wheel cylinders. Brake line is NOT the same as other braided line. Most braided line is rubber or Viton, neither can be used with brake fluid. Brake lines need to be PTFE line. The other thing with this is that the lines don't do well with hand assembled fittings, they need to be crimped with a crimping machine. Those are about $2800, not something a guy is gonna just go buy. The other thing with any braided line is that it will have a bit of expansion as you put pressure in it. With the amount that you are talking about it's going to be pretty significant and it's going to make your brakes feel spongy, even when properly bled out. As far as your metal, I would look in the phone book for metal shops or talk to Tinman. Buying the shit at the big box stores like Lowes is going to be really expensive, not to mention it's cheaper in full sheets. I bought a sheet of 24 gauge today that is 36X96 to build some duct work for a furnace. The 36X96 was $33, the sheet that was 36X36 was $18. you do the math.

Consider this, he has NOT been at that location for 25 years. He HAD the Chevy dealership there before it was Liberty Chevy, and is now Lash Chevy. Why would you lie on your own web site abut your business. There are rumors around Johnstown that he lost the Chevy dealership, but nothing concrete. And when I say lost I mean Chevy and Dodge told him they would not sell him cars any more and he was not allowed to sell their new cars he had on the lot. Again, this is a rumor, and Johnstown is full of them. I have heard numerous things, nothing good and that was even from guys that worked there in the past. I do personally know that he did some funky paperwork on my wife when he had the dealership and she bought her Caviler. Basically she owed money on her trade, he showed the trade in at the top of the sales sheet, but added in all the money that she owed on the other car, which is normal, but then there were other 'fees' for taking that car that basically just wiped out the entire trade in allowance, by the time it was done she paid for the new car, paid off her old car and got charged $500 for him to take the car in on trade. Personally I think the guy is a crook, but I can't say that he's ever fucked me directly, just my wife.

The BP here in Johnstown once told a friends wife that her car needed a tune-up. Problem was that John had just finished doing a tune-up and oil change but was a quart of oil short. He told his wife to take it up and get a quart and have them put it in. The comment was made by the guy that put in the quart of oil. Needless to say we went up and had a talk with them, till the cops got there, we got sort of loud about it in front of other customers which all left before they could get raped as well so they called the cops. The J-town police force were having them do their work at the time but I don't think that's the case any more.

Come on, someone needs a truck. New price, $1000 OBO Can work a partial trade, but min cash is $500

Honestly I hadn't seen Adam post in months. I knew that there were several guys here that talk to him weekly and I figured that one of them woud pass this along. I figured if he wasn't posting he might not be bothering with checking his PM's either.

Good point, anything is a weapon that is used as such. But using a cattle prod to heard assholes is not using it as a weapon, it's being used for it's intended use, herding livestock. As far as having been shocked by a cattle prod, yeah, it happens when you are driving cattle off to their higher calling (the truck to taking them to the slaughter house to become steak). And there again, the rock would just knock me cold, the cattle prod STILL hurts more. It's made to hurt. Closest thing I have even experienced was grabbing a bad plug wire on the Camaro and having that MSD 6 with the blaster coil light me up, and even that wasn't quite as bad. As far as herding them back to the boats, that was a rather derogatory comment, even borderline racist. So I will restate it and instead of hearing them to the boats headed home, I figure that you could just heard em back to their 7-11's to sell me Cherry Slurppies

Yes but there is a difference between hillbillies with a couple old cars and things that actually hurt properity values. I am not saying that living next to a full on junk yard is not going to be a bit of a detriment to your property value, but a neighbor with a old car or two ain't gonna have much effect. But the pink flamingo's are another story.

Sorry for posting this like this but I know he's still looking for car parts for the Camaro and I found them cheap http://columbus.craigslist.org/pts/240281984.html Who ever talks to him please pass this along.

Bump for a good work truck.

BTW, I don't believe, but could be wrong, that the commies went this far. I believe that even the USSR had some religious freedoms.

This is what PC gets you. Look at the percentage of Christmas celebrating people in the US, but its against the Constitution (which says GOD right in it) to put the Ten commandments, or a cross or andthing really to do with Christmas in a public building. Go figure.

A stun gun is a weapon. Even if it's a non-lethal, it's still classified as a weapon, get a cattle prod. It's not a weapon and hurts more. It's not incapacitating like a stun gun and doesn't scramble your nervous system like one either. Due to this, it hurts more, trust me I have been hit by both, I will take the stun gun any day over a cattle prod. And then you can heard the fuckers back to the boat they got off as well. The stun gun just leaves them quivering in the street.

http://thatvideosite.com/video/2732

Johnstown Animal Hospital Alexandria Animal Clinic

The republicans did loose, due to the war and scandals, they beat themselves. I really don't believe they lost on a platform of policys as much as they screwed themselves on these two other things. Hell, look at Nancy P and the cat hearding she is already involved in. You have Waxman out in Califorina screaming that he's going to lead the charge into a full (expensive) investigation of the entire Bush presidency and the head of Ways and Means cliaming that he's going to push forward to reinstate the draft. Do you believe that those are election winning issues. Not to mention Clintons money guy talking about raising taxes because the economy could handle it, after saying that the Bush tax cuts would do nothing for the economy. I am not saying that the dem's don't have a few good ideas. I see a split on the illegal immigration policy and I am 100% for throwing them all out of the country and doing everything we can to keep them from being here illegally. If that means fining and jailing the people that employ them, so be it, even if it goes to seizure of their businesses. I put together a big post elsewhere about how illegals hold down the wages down for all Americans so I am not going to go into all that. All I can say as far as the dem's winning in such a land slide victory is that the American public put them there because they want to see change, it's really on the democrats now to get changes to occur, if they do then great, if not, they will not sit in power for long.

I don't know about that, not that I am questioning it. But I do know that carbs are FAR cheaper, in all but the most esoteric setups. Oh yeah BTW, Greg.... Bite me!

Well, it happened. Through my deals and the like I am now the owner of a SBC TPI setup, minus injectors. I am thinking about ordering a megasquirt kit and trying to do the injection thing instead of being a stead fast carb guy.

Ford pickup Aluminium rims 4 speed with 'granny' first 300 inline 6 with new head gasket and all EGR/airpump?smog BS removed rebuilt carb Cab is white be is blue with a bed liner sliding rear window. $900 OBO Call Keith Sr at 614-923-9622 for more information. http://www.foornet.net/images/interior5.jpg http://www.foornet.net/images/truckfront.jpg http://www.foornet.net/images/truckback.jpg http://www.foornet.net/images/truck1.jpg http://www.foornet.net/images/truck2.jpg http://www.foornet.net/images/truckbed.jpg http://www.foornet.net/images/truckback.jpg http://www.foornet.net/images/rearslider.jpg http://www.foornet.net/images/interior1.jpg EDITED: I made the pics links. They were freaking HUGE.

Raising wages isn't a bad thing,as long as it's not mandated by the government to be raised at a specific amount. Not to mention that the mandated raise is coming on the eve of a major tax increase. The problem with this is that as the 'low paying job' positions are filled by illegal workers and workers with visa's and gren cards, they work into the higher paying jobs and create a whole nother 'low paying job' market like the construction industry. Like I said before that WAS a good paying industry, now it's not. Alot of people's mentality is it don't effect me so I don't care. But there is an effect, and it has to do with everyone. Wen people don't see the big picture it becomes a serious problem. Think about how just got the raise, the lowest paid workers, who happen to be the same people that are doing the low paying jobs that no one else wants.

Just easier to tear apart a bit at a time. I do find it amusing that a 20 yr old kid that is still got that silly "gee I'm actually getting laid" face on when you are with a woman attempts to act as if they are worldly. Try again in 15 yrs and see if your opinion has changed a bit.

Have you considered actually thinking about what you are saying, or are you just acting as a mouthpiece for some other non-thinking fuck? Tell you what, since the queers in this country are now being accepted as normal, how about you let one of em pound you in the ass. I mean after all, it's their culture to do such things, so you should just bend over and accept it right? Do you think that Germans, or Russians or any of the other nations of the world would all learn English if we were overtaking their border in the numbers that the illegal Mexicans are taking over ours? Hell, do you think if we sent 2000 Americans a day across into Mexico that they would learn English down there? Cuz they sure ain't fucking bothering to do it up here. And as far as the US being cultured, and accepting this, remember we are being over run by ILLEGAL immigrants that you believe that we need to learn their language. They are not even suppost to be here, so why should we accept their language, or anything else they bring with them as far as culture? Have you no pride in your heritage or your country? Idiots like you is what keeps me smoking, knowing full well that I will be dead before you get the chance to be in a position of power and able to make desisions about things of this nature.