Ef8sirJunkie

Check thermostat ground. also try a main relay.

most chipped ecu's do not work with auto cars. basicly because mainly civics do not have an external tcu! some integra's accords and preludes do. my guess is the ecu and transmission are incompatible. try another automatic ecu is it vtec or not ? if its not vtec that p06 stated above would work.

ecu will not effect shifting if its a manual some cars it will if automatic. need more info on the car and set up. Motor- ? Head- ? ECU- ? Transmission- ? has there been any wiring done to car- ? Please open ecu and take a picture and post it for me to see. i will be able to tell you if its chipped or not.

on the left hand side of the block right by the slave cylinder (if manual) will be an engine code please list this. behind the passenger kick panel the ecu resides there in the middle of the code there are 3 digits (P28, P06, PR4, etc) please list those as well. Please list any info your neighbor might have done to the car. if vtec swapped he might not have wired it to the ecu correctly. here is a correct diagram http://www.ff-squad.com/tech/wiring/wiring.92-95.jpg we will need alot more info to go off of.

7.3 turbo powerstroke + edge chip = 30-32 mpgs in summer (if you drive with sense). plus tons of power and torque. have 3 buddies with an f250 and 2 f350's all same chip and getting close to that gas millage even with 10 inch lift on one. one day when i have money i will to have a f250 with 7.3 turbo powerstroke.

thank you everyone. dont be leave rotor is warped i also dont work in a shop anymore that has access to a lath or else i would have cut them at work. yes i lubed all the sliders and pad backs as i said earlier with copper brake lube (use this on BMW's every day as i work for a dealer, used similar stuff when i worked at a honda dealer). have not yet taken the pads off to see if they are glazed will be doing this saturday as stated. front calipers hold the pads by 2 long alan head caliper bolts. someone working at a chevy dealer can confirm this. i usually buy oem parts but i tried 2 sets of pads threw aftermarket companies now. 2 different brands of pads so i could rule pads out. also forgot to mention i cleaned out the metal tabs with a wire brush as i always do.

not that i remember i can always take them apart again and check. doing regular maintenance on it coming up this Saturday so ideas welcome.

Ok ride is a 97 chevy blazer 4wd 4.3L. i had a brake squeak in the front and replaced front pads 2 months ago. now the brake squeak has been back about 2 weeks after i did the pads. i bought the high dollar ceramic pads from advanced. used copper anti seize on the bolts, ears, and back plates of the pads and calipers. Just really annoyed with the sound and im stumped anyone have any more ideas i might be over looking?

looking good! are you gonna be using tuner studios on your MS2?

I got a spare one brand new. $20 and its yours.

caint wait to see it in the light this time.

cant wait to see it next saturday :thumbup:

there more to it then just downloading and burning it needs tuned. yes i can do it but like i said car needs tuned to its own specs not a map off the internet.

OBD-1 programs will not work on OBD-0 computers he will either need to run Turboedit or BRE. both programs are outdated but still are used in the honda community. ran turboedit on my old set up for a while just fine and have run BRE on others.

some nice pics. i know a few of those names personally.

Nice looking S13. id boost the KA imo

Josh lets make that Saturday i have Dinner plans sunday i cant miss or she will cut my head off and shit down my spine. :bangbang:

you know you love Edward you big gay vampire lover you

try starting here www.moates.net found this Moates sells all the cables and chip adapters for the pcm's. Dyno Brian has tuned a early model chevy truck (be leave 92) and a 3rd gen camero using Dynamic EFi. he also has access to Tuner Pro Rt that i installed on his computer.

ill get you the measurements. i dont care for pad just want her to walk up and down lol.

moved into a new apartment this weekend. my dog will not go up and down our basement steps to our room (where she would be sleeping) because i think she is afraid of the wood stairs. just wandering if you guys have some decent old carpet, or know of some carpet companies that might have some left over scrap i can put down these steps. Thanks.

Josh you painting that car PURPLE! first pink now purple :gtfo: :bangbang::zoom: