Geeesammy

So how long until you set up another gofundme page asking for an obscene amount of money?

The car is rekt. Haul it to the scrap yard and call it a day.

They are turning into the next Coldplay now.

Authentic 044, was going with a twin 044 setup, but not doing it now. $209 or so new depending on where, selling for $170 firm.

Congrats, best of luck!

If you want really clean the only solution in my eyes is making it yourself.

No Aaron already called dibs.

Buckeye did IIRC. He was (maybe still is) working at a movie theater at the time from my understanding and that allowed the group to get the private showing I think. Maybe he will chime in.

12 of these http://oikos.com/esb/53/novitas.html http://i.imgur.com/v6jz62s.jpg Willing to split them up, $10 each, or $80 for them all. Just have been sitting in my garage for two years. Old BMX bike, If my memory serves me right it is a Mosh Bagley 2 star. Free, needs some work, the headset is loose, crank is loose, would make a cool project for a dad and son that can't drive. Shelf, used in my garage, little bent, but rig up some more supports and it should work great. Thin gauge metal, but it is surprisingly strong for how thin the metal is. Likely had 200+ pounds of stuff on it no issue. I stand 6'6" and the very top shelf I stand eye level with. 4' or so wide. Maybe 1.5' deep. Free Have a few more things to post later. PM is best, would rather you just come to my house to pick anything up. The bigger stuff would be a big hassle for me to move around. Located 5 minutes from Polaris.

Knock on the door and inform them that they are being jackass's and you would like the parking available in front of your home. If this doesn't work, take a small pebble and place it under each valve cap, tighten them up as much as you can. When they have four flats each time they park in front of your house they should get the memo.

This might as well be in Spanish. CR doesn't do basketball.

For TPMS you should just be able to throw the old sensor in the new wheel, air it up and drive it. It should reset itself.

I used to pop Coyotes at my house near Dayton when I lived there. 10/22 and bolt action .22 was used. Some times that would get boring so dad would use an AR15 or his .300 win mag :megusta:

$7500-$8000 would be my top dollar. VVTi is nifty but you cant tune those ECU's so you'd have to go standalone. All this thing is, is basically a LHD Aristo for arguements sake. You arent gonna get much more boost out of it as 1 bar is fuel cut and the defender doesn't do much. It also doesn't have working cruise control.

Why did I never think about Cabela's. That is a hop, skip and stones throw from me. I'm not as concerned about it as it may seem. I was just looking for some first hand experiences people here have had, that's all. Got exactly what I was hoping for.

I've thought about this as well. The two people that I have contacted asked me to come to their place of residence. That is just not going to happen. If it is someone I know, sure. Friend of a friend, sure. Any other circumstance it is not even debatable.

Over the past few months I've seen countless weapons I would like to purchase that are listed on Armslist. However due to what I see as a risky transaction (a party unknown to me, with at least one firearm involved) I have not bothered to contact anyone. What have you personally done to ensure these transactions are as safe as possible? Please don't give me the obvious "well lit place in a non sketchy area of town". I know on Craigslist a huge area with loads of people, for example the Polaris Mall parking lot is a good idea, but for something like this all it takes is one mom to see two guys standing around fiddling with a gun and it can quickly escalate to officers showing up with guns blazing, almost figuratively.

At least it wasn't luaP

You have impeccable taste. I love these things.Every time I see one I get nasty thoughts

So are the wheels purple or pink?

I read the TSRM for you, this is what it said. "If Connector C3036A is damaged at Pin M GD145 (BK-WH), then replace connector pigtail" "1. Obtain Pigtail Kit. Strip the ends of the wires from Pins L and M, 1/4" (6.3 mm). Twist them together. Insert twisted wires into one end of a 12-10 gage butt splice. Using the approved splicing methods found in the Wiring Diagram (WD), Cell 5, crimp the butt connector. 2. Strip the end of GD139 (vehicle harness side - ground) and insert into open end of the 12-10 butt splice (at Pin M). Using the approved splicing methods found in the WD, Cell 5, crimp the butt connector and seal with shrink tubing. 3. Continue to attach the rest of the pigtail wires to the vehicle harness, using the approved splicing methods found in the WD, Cell 5, crimp the butt connector and seal (with shrink tubing). Wires from pins E and F will require 12-10 butt splice which is not included in the pigtail kit. "

Dem sounds :megusta: https://vimeo.com/120812037

"due to a ground concern" Guessing the "blk-wht" wire is the ground in this circuit. Link to TSB and it includes the connector pinout but not location. http://ww2.justanswer.com/uploads/bobover/2010-02-25_011521_inop_dscm_navigator.pdf Since the labor time/codes words it as time to remove/install seat, expect to remove it. Double the labor time it has listed and that is how long it will take you to get it out without air tools. Seems pretty cut and dry as you are only replacing a connector and don't even have to de-pin it.

I approve. I've been eyeing some forms of an HK in .45 for awhile.

Not a bad way to spend $250,000. Sure it is 3.5 bath and not 2.5? Most these I remember working on had 2.5 bath..