2talltim

You know me bubby my work schedule is always a last min thing. But if I can i plan on coming. I can bring any last min deserts or chips or just bring some stripper ones.

Sorry that's my mock up pic...lol.. you really think I'd leave that rough non rounded backet that way with no washers or threadlock on the hardware? I'm a god damn professional hack not sone two bit one.

The cable does run a tad at a angle from the bracket to the TB linkage at closed throttle.but at WOT it is perfectly straitup and down. The ball on the TB linkage travels down and to the left. Not a perfect sinario bit the best it can get with out risk of a bind. There isn't enough room to angle it perfectly and the cable from the servo would have a really tight bend if tried to run it a different way. I think with my final product I did rotate it a few degrees clockwise to make it slightly less of a angle vs that picture.

And pony cars

Not really. I tried the bolt just to the left of where it is now and it allowed it to have a snag or hang up that could result in the throttle sticking. It's actually pretty stout where it's at. That grey wire harness with the black zip tie and metal bracket hangs in front of all that that and reality supports everythibg as well. Ill click another picture of it tomorrow all cleaned up and supported.

That is next on the agenda.

Mine is just the 36L kawasaki/givi one. I wish it were a tad bigger. Here is the best rack you can buy. Then get the SW kit for it and there are a few givi boxes that click right to it that are mono key. http://www.philsfarkels.com

Only use it on long trips can't imagine being on the road without it. Keep all the stuff I like to have easy access to during the day in it. Snacks,drinks, extra gloves stuff to clean my shield,ect. Local in state runs I don't use it. I picked mine up used but if I were buying new I'd go bigger and get the givi case that clicks right to the Phils rack. The stock rack is know to breakage with too much weight on it.

Always said there was one thing missing to make my connie a truely perfect bike. Thanks to @JustinNck1 for giving me the connection on a half priced unit. All wired up and plumbed in just waitingfor a coil pulse adapter to come in the mail. Got about $110 invested in it.

Projects have begun

Haha, sorry bubby I had too.

Add one more thing. Built me a tire rack out of scrap wood. Got them off of my changing stand and the used ones off the floor.

Didn't work on the bikes today but I got my garage claimed back from winter storage. We have a car that we don't drive in the winter but the wife likes to park her old car in the garage during the winter so she doesn't have to clear the snow from it. Well the old work car got booted to the driveway today reclaim my garage space. Ready to do some wrenching starting tomorrow on the bike.

I might be interested in you in that sectional if the section on the left can be converted to the right. Looking at the pictures I'm thinking it's not. Also any special OR pricing on stuff? Because you know we are cheap asses. At least I am anyway.

He's meeting @Casper for lunch.

I would be upset if there were not onions on a CBR pizza.

Parts order to proactively replace coolant lines and o rings. 7 years past due according to MaKawi.

Yea I log 10k steps or more every day at work in 8 hours usually around 15k to 20k in a total day every day. And that dons't figure my stairs i climb and thing i lift.

As active as I am at my job and on a daily basis don't think I'm quite ready to go that extreme yet. I'm probably more active on a non workout day than most people are on a workout day. So I'd be concerned about losing too much muscle mass on a flat out water fast with no protein intake. I'll give my idea a shot first but if it doesn't work maybe I'll try the water thing at some point.

I feel I'm at a huge plateau, been hovering at 228 to 231 for about 4 weeks now maybe longer. It doesn’t matter if work out, don't work out, work out harder, eat different stuff , ect ect. Same result. So im going to do one week of extremely low calories and see what happens. Started yesterday and my goal is to be 1200 or less per calories day all week through Saturday. After that I’ll get back to my regular scheduled program.

Nah, as often as I use mine its fine. Thaks for the thought.

When you're paying 20 plus dollars an hour it's a very low turnover rate. That's usually the comeback the company gives us when we bitch about hours and other things "we pay you well enough don't we". And as much as they are dicks for saying that they're absolutely right where else am I going to go and start making over $20 an hour especially around here with the benefit package that we have which is excellent btw.

FYI anyone that wants this job only needs to give bubby @marlboro man a fist bump during the interview and your in. Your welcome