Jump to content

LS1 Guys...What do you shift at/rev to?


Bam

Recommended Posts

i have been trying to explian this for 3 fucking pages now :rolleyes:

 

dude, i hope you're not saying that towards me.

 

I've posted multiple times that my car makes peak power and like 53/5400 and it shifts at like 55/5600, that's obviously a little PAST peak power so that when it drops down its in the power band, right?

Link to comment
Share on other sites

  • Replies 150
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Your car is still making over 300rwhp at 5800 rpm there is no reason to shift your car before that. Your graph is fine and for a lid only car 312rwhp is normal. Have Brian set your shift points to 6000 rpm and I would talk to him about making the car alittle leaner. 12.5s is way safe. I would want to see your car in the 12.8-13.1 range.

 

There is nothing wrong with your car and you need to use NGK TR5s with your setup they should be pregapped for you but make sure you check them.

Link to comment
Share on other sites

Your car is till making over 300rwhp at 5800 rpm there is no reason to shift your car before that. Your graph is fine and for a lid only car 312rwhp is normal. Have Brian set your shift points to 6000 rpm and I would talk to him about making the car alittle leaner. 12.5s is way safe. I would want to see your car in the 12.8-13.1 range.

 

There is nothing wrong with your car and you need to use NGK TR5s with your setup they should be pregapped for you but make sure you check them.

 

I can't tell you how many cars I've changed plugs on and they are all sorts of jacked up and inconsistent lol. Check the gap, it takes a whole 3 seconds per plug.

Link to comment
Share on other sites

Your car is still making over 300rwhp at 5800 rpm there is no reason to shift your car before that. Your graph is fine and for a lid only car 312rwhp is normal. Have Brian set your shift points to 6000 rpm and I would talk to him about making the car alittle leaner. 12.5s is way safe. I would want to see your car in the 12.8-13.1 range.

 

There is nothing wrong with your car and you need to use NGK TR5s with your setup they should be pregapped for you but make sure you check them.

 

+1

Link to comment
Share on other sites

Alright guys, thanks for the info, like I said I've never read a dyno before so all I was looking at was the top of the curve, I don't know how to read the power under the curve and all that stuff.

 

I have and will talk to Brian about adjusting the shift points, I don't recall what he set them at, I only know what the car reads RPM wise when driving, and as said before I guess some tachs are slow..

 

I am doing a full tune-up on the car tonight, so we'll see if that changes anything and go from there. I do have longtubes in the garage that I want to install at some point as well.

Link to comment
Share on other sites

Maybe it was over looked, I'm sure Brian will make it right for him.

 

Agreed, Brian has offered to do whatever he can to make me feel better about my car and ensure I'm happy.

Link to comment
Share on other sites

Maybe it was over looked, I'm sure Brian will make it right for him.

 

And like you were saying earlier, it may be shifting at a higher rpm and the tach just looks like it's shifting at 5500 and it's really 5800 or something...

 

edit: if you really want to know, get a shift light. I have a raptor shift light hidden in a vent and it's wired directly to the pcm. I think it's more accurate.

Link to comment
Share on other sites

And like you were saying earlier, it may be shifting at a higher rpm and the tach just looks like it's shifting at 5500 and it's really 5800 or something...

 

edit: if you really want to know, get a shift light. I have a raptor shift light hidden in a vent and it's wired directly to the pcm. I think it's more accurate.

 

 

I did the same, the higher you rev a ls motor the more the F-body tach is going to be off/slow. In first gear my tach says 6000 rpm when my shift light is on at 6900.

Link to comment
Share on other sites

I agree with linn. I shifted my stock cam car at 5800 on the tach. since its slow it was more like 6k. if your tach is stating 5500 I am sure brian set it at 5800. I don't see what the problem is. 312 for a stock a4 ls1 is pretty good.......

 

whats all the fuss about?

Link to comment
Share on other sites

I did the same, the higher you rev a ls motor the more the F-body tach is going to be off/slow. In first gear my tach says 6000 rpm when my shift light is on at 6900.

 

lol damn. I never really pay attention much anymore, I can kinda feel when my power is about to drop off. That and when I see that red light I just bang the next gear. I think if I try to pay attention to the tach and shiftlight simultaneously I'll bounce the rev limiter lol.

Link to comment
Share on other sites

And like you were saying earlier, it may be shifting at a higher rpm and the tach just looks like it's shifting at 5500 and it's really 5800 or something...

 

edit: if you really want to know, get a shift light. I have a raptor shift light hidden in a vent and it's wired directly to the pcm. I think it's more accurate.

 

I have the same setup!;) I don't even watch my tach anymore....

Link to comment
Share on other sites

I did the same, the higher you rev a ls motor the more the F-body tach is going to be off/slow. In first gear my tach says 6000 rpm when my shift light is on at 6900.

 

TRUE TORY! I have shift lite set at 7500 and my tach reads @7100 but i refuse to put an aftermarket tach in my "street" car.

Link to comment
Share on other sites

Couple of things.

 

1. WOT shift points are set on Matts car at 5800 rpm. I will be glad to read the tune out of it and let people have a look at it.

 

2. Just because the commanded shift point is at 5800 rpm's does not mean it will complete the shift by 5800 rpms. I bet if we were to scan the car during a pass at the track we would see shift points much closer to 6000 if not a little higher.

 

3. Agreed with Gearhead that the A/F should not be 15.3 and that something is wrong. I noticed the maf readings were lower then normal which is why I started tuning by turning the maf off and running in speed density mode. Fuel Trims were within a fuel percent and A/Fs dropped down into the 12's. Maf was checked out and cleaned and began tuning with the lid.

 

4. If anyone has any questions feel free to shoot me a PM.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...