bowdog Posted September 27, 2012 Report Share Posted September 27, 2012 Looking to buy that 250cc dirtbike that has been sitting in your barn that you keep looking at but realize your really not going to do anything with, Motor is not a huge issue for me and either is title. mainly need frame and a good place to start for building a bubby hillclimber for some good summer fun next year. Already have a test dummy, so no need to apply! Also I am very fond of Yamaha's and Honda's so I would prefer them. Thanks! Quote Link to comment Share on other sites More sharing options...
RHill Posted September 27, 2012 Report Share Posted September 27, 2012 Probably not what you are looking for, but I have an 03 yz 250 in great shape. Quote Link to comment Share on other sites More sharing options...
bowdog Posted September 27, 2012 Author Report Share Posted September 27, 2012 Probably not what you are looking for, but I have an 03 yz 250 in great shape.Exactly what I am looking for but not sure its in my budget for this build. Can you PM me a price? Quote Link to comment Share on other sites More sharing options...
OSUYZFR1 Posted September 27, 2012 Report Share Posted September 27, 2012 You looking for a 2 smoke or 4 stroke? I have an 05 CRF250R that I haven't ridden in two years that I might be interested in selling. Fresh valve job done by Jesse@williams motorwerx. High comp piston done at the same time. Quote Link to comment Share on other sites More sharing options...
bowdog Posted September 27, 2012 Author Report Share Posted September 27, 2012 Like to stick with a 2 smoker becasue of being able to work on, dont know too much about tearing down and rebuilding the 4's. Quote Link to comment Share on other sites More sharing options...
magley64 Posted September 27, 2012 Report Share Posted September 27, 2012 a little bigger than you mentioned, but we got a sp600 rolling chassis, engine fired up a couple years ago, but the case was cracked so it leaked oil.no handlebars, but 2 wheels, engine, forks, springs, seat, etc... Quote Link to comment Share on other sites More sharing options...
bowdog Posted September 27, 2012 Author Report Share Posted September 27, 2012 a little bigger than you mentioned, but we got a sp600 rolling chassis, engine fired up a couple years ago, but the case was cracked so it leaked oil.no handlebars, but 2 wheels, engine, forks, springs, seat, etc...Hmmm. Quote Link to comment Share on other sites More sharing options...
flounder Posted September 27, 2012 Report Share Posted September 27, 2012 I have an 02 yz 250 I'm looking to get rid off. I think there are pics of it in my gsxr for sale thread Quote Link to comment Share on other sites More sharing options...
bowdog Posted September 27, 2012 Author Report Share Posted September 27, 2012 I have an 02 yz 250 I'm looking to get rid off. I think there are pics of it in my gsxr for sale threadInterested! Please send me some info and price when you get a chance. Quote Link to comment Share on other sites More sharing options...
hue jass Posted September 27, 2012 Report Share Posted September 27, 2012 Try this site...BikeFindsI'm looking for just the right '03 CR250RThese things are hairy machines (put you on your ass in about 2 seconds) unless you have some real wide-open expanses, and terrible for any trail riding. I'm on the fence. Quote Link to comment Share on other sites More sharing options...
SecondLiar Posted September 27, 2012 Report Share Posted September 27, 2012 Mine is still available:http://ohioriders.net/showthread.php?t=95039 Quote Link to comment Share on other sites More sharing options...
bowdog Posted September 28, 2012 Author Report Share Posted September 28, 2012 ^^This may be an option, is the motor hosed?edit: nevermind I read it is not, let me consult a couple bubbys that dont realize what they are getting into yet! Quote Link to comment Share on other sites More sharing options...
marlboro man Posted September 29, 2012 Report Share Posted September 29, 2012 :villagers: Quote Link to comment Share on other sites More sharing options...
idodishez Posted September 29, 2012 Report Share Posted September 29, 2012 98 yz250 I may part with. But if all you want is frame I'm guessing u don't want to pay much?Nobama 2012 Quote Link to comment Share on other sites More sharing options...
Helmutt Posted September 29, 2012 Report Share Posted September 29, 2012 Looking to buy that 250cc dirtbike that has been sitting in your barn that you keep looking at but realize your really not going to do anything with, Motor is not a huge issue for me and either is title. mainly need frame and a good place to start for building a bubby hillclimber for some good summer fun next year. Already have a test dummy, so no need to apply! Also I am very fond of Yamaha's and Honda's so I would prefer them. Thanks!You are just 6 short months too late for a deal I had here. Sold my basket 96 CR250R to Shadyone here CHEAP. Lots of spares went with it too. Let me check with a few guys I know that trade around and see whats out there, will let you know if I come up with something. Think there was a CR500AF conversion somewhere around here if you want a huge powerhouse for hillclimbing Try this site...BikeFindsI'm looking for just the right '03 CR250RThese things are hairy machines (put you on your ass in about 2 seconds) unless you have some real wide-open expanses, and terrible for any trail riding. I'm on the fence.I loved my CR in the woods, go with a mid/low pipe and jet for better grunt on the bottom end though. Makes a big difference for when you cant wind it out in tight places. If you really want a wicked woods weapon, the 450 fourstrokes are stupid fast and powerful - really got to baby those things in the trails:D Quote Link to comment Share on other sites More sharing options...
Beegreenstrings Posted September 29, 2012 Report Share Posted September 29, 2012 Ill sell you my 94 CR250... 3K and Ill throw in a ring! seriously text me tomorrow Ill be in cbus and we can talk. I just repainted the bare frame. Motor is at weaver motorsports, with a complete lower end rebuild. Tops end is sitting in the garage with a fresh hone job on the head, fresh piston still in the wrapper and a brand new gasket set. Quote Link to comment Share on other sites More sharing options...
max power Posted September 29, 2012 Report Share Posted September 29, 2012 CR500 would be badass!Go big or go home! Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted September 29, 2012 Report Share Posted September 29, 2012 If your building a hill climb bike are you trying to stay in a certain class? Otherwise why the small bike choice? Quote Link to comment Share on other sites More sharing options...
bowdog Posted September 29, 2012 Author Report Share Posted September 29, 2012 (edited) Thanks Hellmutt, if looking around I guess we should throw a CR500 on the list...Thanks for the help!! @rawlins87 not really sure, thinking this would make a fun winter beer drinking project, we will be recruiting you soon enough for welding!! going to start some research on classes and look into some hillclimb threads, I was just assuming we would run open class and a 250 frame with a big ass motor would be cool. Edited September 29, 2012 by bowdog Quote Link to comment Share on other sites More sharing options...
bowdog Posted September 29, 2012 Author Report Share Posted September 29, 2012 :villagers: This can be worked out!!Ill sell you my 94 CR250... 3K and Ill throw in a ring! seriously text me tomorrow Ill be in cbus and we can talk. I just repainted the bare frame. Motor is at weaver motorsports, with a complete lower end rebuild. Tops end is sitting in the garage with a fresh hone job on the head, fresh piston still in the wrapper and a brand new gasket set.... Just got home from hunting, have a Buckeye game party to head too but I will definitely give you a call to talk later or tomorrow about the bike. Quote Link to comment Share on other sites More sharing options...
bowdog Posted September 29, 2012 Author Report Share Posted September 29, 2012 Sorry Bee I just saw you posted this today, I will text you tomorrow. Quote Link to comment Share on other sites More sharing options...
JCMathis Posted September 30, 2012 Report Share Posted September 30, 2012 I have a frame from an 02 WR426F that you can have if you want it. It is straight, no cracks. I bought it thinking I was going to powder coat it and swap out the frame on mine. Also have a set of wheels from an 02 YZ426F that I would part with very cheap. Quote Link to comment Share on other sites More sharing options...
Helmutt Posted October 3, 2012 Report Share Posted October 3, 2012 Well, I've asked and asked around here and the one that was up for grabs is long gone. Here's some possibilities to wet your whistle if you don't mind driving or maybe working out a halfway meet with the owners...http://cgi.ebay.com/ebaymotors/1989-Honda-CR-500-/120992266885?forcev4exp=truehttp://cgi.ebay.com/ebaymotors/Honda-CR250-dirt-bike-/180986264397?pt=US_motorcycles&hash=item2a239f3b4dhttp://cgi.ebay.com/ebaymotors/1995-Honda-CR250R-/330802616518?pt=US_motorcycles&hash=item4d055f58c6http://charlotte.craigslist.org/mcy/3303171285.html 1 Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted October 3, 2012 Report Share Posted October 3, 2012 Adam, Devons dad has a yz490 I think he would sell. Needs some work to get running but would be a option. Quote Link to comment Share on other sites More sharing options...
bowdog Posted October 3, 2012 Author Report Share Posted October 3, 2012 Adam, Devons dad has a yz490 I think he would sell. Needs some work to get running but would be a option.Yea let me know if you talk to him soon on what he is wanting...thinking a complete motor swap anyway. thanks buddy! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.