All Activity
- Past hour
- Last week
-
Friday night on my way home from work the transmission started shuttering and making a cavitation noise on acceleration in 1,2 and 3. checked the fluid at 150F it looked just a touch on the high side, not enough to cause issues I don't think and found a bunch more glitter, this could be the new bushings or could be a some left over from the electronics, might have missed. Soooo, hooked a pressure gauge up to the transmission. it's only running 65psi line pressure in park, neutral, OD, D, and 2 positions. reverse is 95psi. revving the engine sees nearly no change when revving, holding the brakes and revving to around 2500rpm sees a quick jump to 95psi. using HPT scanner, I can command higher line pressure 900-980mv are within the GM spec under 900mv sees quite a bit more pressure, which I would expect to see with the boost valve. I just, don't know why it's commanding 1.07v for pressure, force current motor voltage is all stock.. gonna go ahead and drops the pan tomorrow, I do believe I may have put a spring or two in the wrong spots in the valve body, so that might be an issue and addressing the glitter I'll check for evidence of bushing failure. maybe I can get away with just fixing the springs in the valve body, without pulling the trans out of the truck.. if I find evidence of fresh glitter, I'll pull the whole thing, replace all the bushings again and sand all the shafts again like Sonnax recommends, and while it's apart I'll also replace the thrust bearings, they didn't FEEL bad when I had it all apart and I soaked them in fresh fluid with the clutches, also going to do the sonnax pump spring.. So back up on Jack stands... Thinking it's a real Syclone or something 🤣
-
Well Done, Keep your mind active.🤤 At 68 I am on a fast downhill in my daily life but on the motorcycle, It all comes back. also, practice the old man handshake.
-
Congrats Jim ! Welcome to the club 👍
-
Congrats Jim! You won't regret it. Been a useless male drone since 2006. Still having fun. And...every day is Saturday!
- Earlier
-
Not mine but a pristine FJR in Seville. Since most of you guys are NEO, maybe there would be interest. (I rode one, didnt care for it) . https://www.fjrowners.com/threads/2016-fjr1300a-for-sale-ohio.160918/?post_id=1403660&nested_view=1&sortby=oldest#post-1403660
-
I would have bought it, but you used the wrong oil.
-
Truth in advertising right there!
-
What did you do for your ride today? (v3.0)
marlboro man replied to Not Brian's topic in Passing Lane
-
Upcoming Events
-
-
Recent Threads
-
Clubs
-
Bottle Exchange
Closed Club · 6 members
-
3rd Honk
Closed Club · 3 members
-
Women Only
Closed Club · 4 members
-
-
Popular Contributors
-
Forum Statistics
-
Total Topics236.5k
-
Total Posts3.1m
-
-
Member Statistics
-
Who's Online (See full list)