Jump to content

How do you clean your chain?


Casper

Recommended Posts

I have always used kerosene because it is o-ring safe and brakes down the grime quickly.  Once clean, I will hit it with some compressed air to make sure it is dry and then reapply a chain lubricant.  I have tried just using wd40 to keep the chain clean opposed to chain lube/wax as nothing will stick to it, but if you get caught in the rain or the chain gets wet you will need to reapply vigorously.  I just prefer a good synthetic chain lube that dries clear and is not tacky.

Link to comment
Share on other sites

wd40 to clean, but only a few times a year. Mainly before storage, after storage, and after riding in heavy rain.

 

before storage I wipe the chain down in some used motor oil  

chain wax to lube, just pop it up on the rear stand and spray every 300-500 miles. Never had a chain fail following this routine. 

Edited by zx3vfr
Link to comment
Share on other sites

I guess once you get the shaft there's no return. I never really clean my chains. I just wipe them off with a rag & lube. I realize that this cuts their life to about 25K but that's the price I pay. Some swear by the WD40 though.

Link to comment
Share on other sites

I get the rear tire off of the ground, start the bike, put it in first gear, little gas let out the clutch and let it start spinning. I grab the chain with my hand and a wet rag and viola!  Clean as a whistle. 

 

Anyone who who believes this is crazy. I only kid but have seen the aftermath of someone doing this, not pretty! 

 

Wd 40 is the best for cleaning. 

Link to comment
Share on other sites

I usually just hit the chain with a rag with some kerosene right after a ride while the chain is still warm to clean. Then I dry it a bit with a clean rag and finally spray it with some chain lube. I have done just the clean and lube with wd40, but it does not last as long. When on long trips, like when I went to the Dragon last year I did use wd at the end of each day. I just bought a small can and kept it in my tail bag. 

Link to comment
Share on other sites

I'm terrible with chain maintenance. I keep a can of chain lube on the bike and a can at the house. Just lube it before most rides and if I do more than about 400 miles I'll lube it during the ride about that time.

I might clean it once a year with kerosene.

Link to comment
Share on other sites

I guess I don't actually clean my chain. While the chain is warm, I just spay it with "Honda Chain Lube with Moly." It's just what I picked up in a local shop. From reading multiple sources, I would not use WD40 for cleaning. Maybe kerosene or a canned chain cleaner. 

Link to comment
Share on other sites

1 hour ago, hiro said:

I guess I don't actually clean my chain. While the chain is warm, I just spay it with "Honda Chain Lube with Moly." It's just what I picked up in a local shop. From reading multiple sources, I would not use WD40 for cleaning. Maybe kerosene or a canned chain cleaner. 

Lots of misinformation and ignorant opinions out there. WD40 will not harm a chain in any way and cleans as well as kerosene.

  • Upvote 1
Link to comment
Share on other sites

3 hours ago, hiro said:

I just spay it with "Honda Chain Lube with Moly." 

Consider switching to chain wax next time you need a can.  Put it on while the chain is hot, let it sit overnight. Outstanding lubrication and virtually no fling if you put it on hot and let it sit overnight.

  • Upvote 1
Link to comment
Share on other sites

I use Royal Purple synthetic chain lubricant.  Goes on clear and dries like clear coat.  You have to wait overnight for it to completely dry.  I love it, no sling and it keeps my chain looking brand new.

Link to comment
Share on other sites

2 minutes ago, Isaac's Papa said:

ORLY? I am about out of chain wax. I love the way it works, but I hate how ugly it makes my chain. 

Yes. I am that superficial. I have carbon fiber mud guards, for fuck's sake. 

That is mostly why I switched from chain wax.  It worked great, but it is always sticky and made my chain and sprocket look like shit.

 

Link to comment
Share on other sites

Another option is DuPont Teflon Chain-Saver.  It is a wax based chain lube, but dries in 30 min or less.  It goes on quick like WD40 and dries really fast, but leaves a very light white film on the chain probably due to the molybdenum.  It will not fling and is not sticky.  Great for anything including dirt bikes and ATVs.

  • Upvote 1
Link to comment
Share on other sites

I've recently picked up AMSoil chain lube and gave it the ole' college try.  It actually works really well.  I did a thorough cleaning of the chain using a chain degreaser (other option I use is kerosene) and let it dry.  Then I used the AMSoil chain lube and it set up really quick.  I only had an hour for it to set and I took off riding.  I had a nice ride and had no sling whatsoever.  I can't speak on if it picks up dirt from the road or not as I haven't had an extended period to check it out but so far I'm really impressed.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...