Jump to content

Home Improvement Thread II (2018)


Zx2guy19

Recommended Posts

  • Replies 406
  • Created
  • Last Reply

Top Posters In This Topic

So I decided to leave the floor alone after seeing how it looked with a darker paint and updated baseboards. I cleaned it a few times with water/vinegar and this weekend I think I will hit it with some floor restore that people go nutty over on Amazon. I grabbed a miter saw, and got an absolute steal on a 6gal air compressor, brad nail gun, 3 other nailers and a finish nailer at menards for like $240. It's this but obviously was on sale https://www.menards.com/main/tools-hardware/power-tools-accessories/air-compressors-pneumatic-tools-accessories/air-compressors/bostitch-reg-5-tool-air-compressor-combo-kit/btfp5kit/p-1487920825770.htm

 

Went with a slightly taller baseboard, I wanted to do 6" but I thought it would look funny with the vent heights so I went to a 4"ish height. Need to do the bedrooms and office still, but office is needing paint and I bought everything Menards had as far as this trim goes.

 

 

I also switched over to white receptacle covers instead of that nasty 60's almond white, while I was at it I instead 20ish new receptacles. Over half in the house had issues grabbing my tester tightly and all were backstabs instead of screws.

 

18U5Cpq.jpg

 

Definitely need to paint the doors white and maybe even update the door trim, or at least paint it white. That should be a bit easier than the baseboard trim though.

Zaq04s6.jpg

Link to comment
Share on other sites

I would just spend the money and get new prehung doors and trim.

 

^^ this. If money is tight, just paint them. Do the doors the same color as the walls and trim white. That would buy you some time before you change them out.

 

Overall, congrats on the purchase and nice work on all that you've done so far!

Link to comment
Share on other sites

So, I decided to repaint the drywall part of my garage, it was originally a flat bright white. I bought semi-gloss off-white for the top, semi-gloss silver for the bottom, and semi-gloss orange for a stripe. I got the fancy paint+primer stuff and went to town.....

 

lTpbVJeh.jpg

 

I painted the top first, the bottom second, then masked off where I wanted the stripe and painted the stripe last.

 

Well, yesterday I just happened to rub my knuckle down the wall, and it "caught" the top edge of the stripe and pulled the paint back. I grabbed it and literally pulled the entire stripe off the wall in one long chunk.....

 

wu28Sqxh.jpg

 

What the hell did I do wrong? Too may coats of orange? Should I have used a primer?

 

I'm assuming this time I need to paint the orange stripe, THEN mask off the stripe and paint the top/bottom edges (white/silver) after the stripe?

Link to comment
Share on other sites

So, I decided to repaint the drywall part of my garage, it was originally a flat bright white. I bought semi-gloss off-white for the top, semi-gloss silver for the bottom, and semi-gloss orange for a stripe. I got the fancy paint+primer stuff and went to town.....

 

Well, yesterday I just happened to rub my knuckle down the wall, and it "caught" the top edge of the stripe and pulled the paint back. I grabbed it and literally pulled the entire stripe off the wall in one long chunk.....

 

What the hell did I do wrong? Too may coats of orange? Should I have used a primer?

 

Semi-Gloss needs to be de-glossed before painting over it. Paint won't properly bond to it and in time will crack too. Did it remove the semi gloss too?

Link to comment
Share on other sites

Semi-Gloss needs to be de-glossed before painting over it. Paint won't properly bond to it and in time will crack too. Did it remove the semi gloss too?

 

Yep, it removed the semi-gloss white/silver from underneath, exposing the original flat white

Link to comment
Share on other sites

Yep, it removed the semi-gloss white/silver from underneath, exposing the original flat white

 

Tape-off and repair the top and bottom areas. Wait 24hrs, then use Yellow Frog Tape, tape off the top and bottom areas and put on some primer or your orange paint if it has primer in it. May take 2 coats to level off.

 

Yellow frog tape is good stuff but don't press it down super hard and do so on the leading edge. Use care when pulling it off. The only time I had a problem with it pulling up paint is on our bathroom that was done in Eggshell. I should have waited longer to paint but I needed to finish. Wasn't a problem but I had to use care removing it off paint that was 24hrs old.

Link to comment
Share on other sites

That's odd. Did you wipe down and clean the wall first? Makes me wonder if there was something on there that was keeping it from adhering properly. It could have also been due to the humidity too. If the outside layer flashed over and trapped all the moisture/solvent in the stripe it could cause it to peel like that. At least it came off in one solid stripe and not a little here or there. much easier to fix that way.
Link to comment
Share on other sites

I would just spend the money and get new prehung doors and trim.

 

^^ this. If money is tight, just paint them. Do the doors the same color as the walls and trim white. That would buy you some time before you change them out.

 

Overall, congrats on the purchase and nice work on all that you've done so far!

 

I wouldn't say money is tight, I'm just a super cheap ass and if I can make it work as is I will. I've already gotta replace 2 doors and just don't wanna drop a grand or two on doors right now if I don't need to.

 

Thanks Tim!

Link to comment
Share on other sites

Moving in a week. My only neighbor owns the 10 acres behind me and is building a mcmansion back there to move into and rent his current house. The driveway he's building slides against my property so I asked him if he could include all the grass between our drives for a big turnaround spot/extra parking for a few bucks. He said sure.

 

 

4nKcRXS.jpg

 

 

Here's a (not so great) pic he took of it in the works

 

48tg1Ar.jpg?1

Link to comment
Share on other sites

Gravel for now but I may spend the thousands needed to cover it with asphalt if it gets annoying down the road. I just wanted a turnaround area since I'll have a bunch of cars parked there and don't feel like backing out 100ft onto a 50mph road.
Link to comment
Share on other sites

I’ve got some rotten 6x6’s surrounding an elevated brick patio that need replacing. I have fallen in love with Menard’s, and I’d like to take advantage of their 11% rebate program to get new timbers.

 

They had some cheap 6x6 landscaping timbers, but the item had been discontinued. To fit the original size there isn’t any premium to go with recycled plastic timbers. Has anyone used plastic boards larger than a 2”x4”?

 

https://www.menards.com/main/building-materials/landscaping-materials/landscaping-timbers/6-x-6-x-8-waterproof-plastic-timber/6x6x8brpl/p-1454045334257-c-12369.htm?tid=1877648851828902067&ipos=10

Link to comment
Share on other sites

I’ve got some rotten 6x6’s surrounding an elevated brick patio that need replacing. I have fallen in love with Menard’s, and I’d like to take advantage of their 11% rebate program to get new timbers.

 

They had some cheap 6x6 landscaping timbers, but the item had been discontinued. To fit the original size there isn’t any premium to go with recycled plastic timbers. Has anyone used plastic boards larger than a 2”x4”?

 

https://www.menards.com/main/building-materials/landscaping-materials/landscaping-timbers/6-x-6-x-8-waterproof-plastic-timber/6x6x8brpl/p-1454045334257-c-12369.htm?tid=1877648851828902067&ipos=10

 

I haven't- are they weight bearing at all?

Link to comment
Share on other sites

I’ve got some rotten 6x6’s surrounding an elevated brick patio that need replacing. I have fallen in love with Menard’s, and I’d like to take advantage of their 11% rebate program to get new timbers.

 

They had some cheap 6x6 landscaping timbers, but the item had been discontinued. To fit the original size there isn’t any premium to go with recycled plastic timbers. Has anyone used plastic boards larger than a 2”x4”?

 

https://www.menards.com/main/building-materials/landscaping-materials/landscaping-timbers/6-x-6-x-8-waterproof-plastic-timber/6x6x8brpl/p-1454045334257-c-12369.htm?tid=1877648851828902067&ipos=10

 

We used them on my aunt and uncles deck rebuild as corner posts. They are non-structural beams but are pretty stout. They were sturdy enough to use them to support the deck corners. So I'm sure they will work fine as a landscaping timber. You can cut them and drill them just like regular wood too. So if you want to run lag bolts to tie them together you can do that with ease.

Link to comment
Share on other sites

With the dimensions of the 6x6s (both plastig in the link above, as well as the rotten timbers in my patio) being 5.5" x 5.5", I may end up going with the 5x5's for almost 1/3 the cost. I need to replace a lot of these timbers as I have stairs and some elevations as well.
Link to comment
Share on other sites

That is what I would do. Especially since the price difference is worth it. The finish height of the timber can be adjusted with some aggregate underneath of it anyway. making up a half inch per post wouldn't be hard to do. As long as the actual dimensions for the plastic are 6x6 or 5x5 and not labelled as such but in actuality shrunken down to match the same dimensions that finished wood would be. I.E. 6x6 wooden post being 5.5x5.5 in actuality.
Link to comment
Share on other sites

  • 2 weeks later...

DAYUM this house is coming along. Passed all of our inspections and insulated the next day (spray-in). Drywall finishing this week, cabinets and tile next week and paint the week after. Exterior wise, siding was finished today and the yard/concrete work is this week/next. Hoping to hit the market pretty soon!

 

314d3f21d44b661d8ee87e43aac60306.jpg

4b3c11ae208257c83c14e9d3d48c6610.jpg

7096c457581ce61a248b8c5bae385404.jpg

f6b3ed0d19a7de84c9f75c2630262500.jpg

a1f96ebc4c2b496269d15df7a660822a.jpg

fcf3ffca79230e8b67f234fb91e6b4c8.jpg

3771e425b5b67ea824eb707b5c618c15.jpg

 

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Wow! Damn, Brad...that house is turning out awesome. Drafts are now a thing of the past with that spray in insulation :lol:

 

 

Haha thanks man. Yeah- $7200 for insulation which makes me want to puke but it’s as good as it gets.

 

Forgot one pic:

a4c88ff73f1ec217aaae22421f23ce4c.jpg

 

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Well had a issue with our upstairs toilet overflowing. got insurance to come out and gut all the damage, decided it was time to redo all the flooring in the house. Redid all the bathrooms and laundry room with a hardwood/vinyl called Nucore because it was waterproof. and redid all the carpet in the house . Flooring turned out so nice we decided to do our main level of the house with it. Living room and foyer.

 

before.

http://i.imgur.com/GYXj4bg.jpg

http://i.imgur.com/CFVUnQE.jpg

http://i.imgur.com/wCmtVXf.jpg

upstairs after

 

http://i.imgur.com/xKCITqR.jpg

http://i.imgur.com/Wcu9231.jpg

 

downstairs I did myself since we were doing more than what insurance would cover. All the carpet was the orginal that we had when the house was build it was def time to have it removed was nasty.

 

http://i.imgur.com/jkODHMm.jpg

http://i.imgur.com/MgjNHhe.jpg

http://i.imgur.com/ghrkq8U.jpg

http://i.imgur.com/uRBjhxj.jpg

 

Added Luan to raise up the floor so there would be no transitions.

 

http://i.imgur.com/6lU4SZh.jpg

http://i.imgur.com/WvBIZhC.jpg you can see where the ins stopped with what needed replaced

got busy laying it.

http://i.imgur.com/IqD3mh8.jpg

http://i.imgur.com/X7SGuHI.jpg

http://i.imgur.com/Q7LsNJU.jpg

http://i.imgur.com/wHUVQRv.jpg

http://i.imgur.com/6JcXNNH.jpg

 

Finished.

http://i.imgur.com/jFRYBSt.jpg

http://i.imgur.com/jFRYBSt.jpg

http://i.imgur.com/4dPZh6O.jpg

http://i.imgur.com/4dPZh6O.jpg

replaced trim with 6" and casing with 4" and cased the window as well.

http://i.imgur.com/216JtTP.jpg

http://i.imgur.com/fTyNyxf.jpg

 

Still working on trimming everything out but will have that done by this weekend when I have time.

 

So far super happy with how it looks and feels walking on it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...